On 23/10/03, [EMAIL PROTECTED] disgorged: >I think the list has discussed paper cutters before, but I can't seem to find >the posts in the archives. My trimming needs are rather modest: trimming 8x10 >out of an 8.5x11 sheet, trimming 3-4x6s out of an 8.5x11 sheet, trimming >2-5x7s >out of... you guessed it, an 8.5x11 sheet. Economics say that using my current >8.5x11 paper is just the same cost as using individual 4x6s. However, I don't >print enough to warrant taking a stack of 8.5x11s to be cut down into 4x6s or >5x7s. Also it seems as if I do a variety of print sizes. Scissors are not much >of an option as I can't cut straight. > >I was out at Office Depot today and saw a variety of paper trimmers, ranging >from about $10 to about $100, made by Fiskars, Rotatrim & Xacto. Any >advice out >there? What are others using?
Dahle. Will trim up to A3 +. Always buy a trimmer that will do one size larger than you need. If you get an A4 trimmer, I guarantee you will need an A3. Cheers, Cotty ___/\__ || (O) | People, Places, Pastiche ||=====| www.macads.co.uk/snaps _____________________________ Free UK Mac Ads www.macads.co.uk
