This will work for the aperture but I believe it will also throw the cameras meter way off. When not fully seated the lever that reports how many stops from full open the lens is set won't be in the correct position. 1/8 of a turn could be several stops.
Don > -----Original Message----- > From: Gonz [mailto:[EMAIL PROTECTED] > Sent: Thursday, November 04, 2004 3:22 PM > To: [EMAIL PROTECTED] > Subject: Re: Stop Down Metering on K, M, LX > > > > > Shel Belinkoff wrote: > > Hi Christian, > > > > A couple of reasons. First, a week or so back JCO made the > assertion that > > by metering thru a lens set at the taking aperture, measuring the actual > > light transited rather than having the camera essentially calculate the > > exposure, would result in a more accurate, or precise, > exposure. I'd like > > to see if there's any truth to that, and if there's any practical > > difference. > > > > My guess would be that the difference would be so tiny as to be > insignificant. Esp with film since there is so much latitude. > > But if you are really interested in testing this, an interesting way to > do this would be to use Mark's trick with the *istD, that is, mount the > lens so that it is not fully locked, to a position such that the lever > that keeps the aperture wide open is not engaged. I believe he said it > was about 1/8 of a turn or so, but check with him. This is ok for tests > like you want to do, but I would not recommend this for everyday > shooting, as the lens is in somewhat of a precarious situation not fully > locked in and could fall off. > > > > Also, I want to compare two similar lenses, one being a Super > Tak that can > > only be used stopped down on K bodies and the other being a K > mount version > > of the lens. It would seem that if the metering styles used > were the same > > (assuming there IS any difference as suggested by JCO), the comparison > > between the two lenses may be more accurate. > > > > However, I doubt that I'd want to shoot that way when making regular > > photographs. > > > > Oh, there's a third reason: I've just a little too much time > on my hands > > right now <LOL> > > > > Shel > > > > > > > >>[Original Message] > >>From: Christian <[EMAIL PROTECTED]> > > > > > >> > Is there a way to use a K-mount lens on the K, M, or LX bodies with > > > > stop > > > >> > down metering instead of having to use open aperture? > > > > > >>Just a silly question, and forgive my ignorance, but why would you want > > > > to? > > > > > > >