With the 1200 ml Photocolor kits you get the most for the money but
  you need however to gather 7-8 rolls to run a batch.
  
  I found that preheating the tank/film by filling it with 40C water
  prior developing, and then having the tank immersed in 40C water
  bath during actual first and colour developing phases keeps the
  temperature to 38 +- 0.5C for the required 6-7 minutes session. Run
  a couple of dummy procedures and check your temperatures with a
  human thermometer to establish a pattern.

  It used to be that constant temperature was the biggest issue.
  Modern films (or modern E6 kits) are more tolerant to small
  temperature variations. Nowadays your worst enemies are dust and
  water impurities. You need clean tap water (no deposits or use a
  carbon filter) and a dust free closet to dry your films. Otherwise
  stick to the lab and your mental integrity. ;o)

  E6 is fun and hey, do it while you can. Soon it'll be fairytale
  subject. :oT
  
  Servus,  Alin

John wrote:

JC> I have used several E6 kits from Kodak very successfully at home, and
JC> cheerfully washed the dregs down the drain. I believe the kits are made so
JC> that there are no dreadfully harmful residues.

>> How expensive would the chemicals be per roll of film?

JC> Cheaper than taking the film to a professional lab, in my case here in
JC> Australia.


>> Would it be possible to do it in my  bathroom with out too much fancy
>> setup?

JC> Yes,you only need ordinary tank or drum processing equipment and some form
JC> of temperature control.  I used a deep sink of water at 40C to maintain the
JC> chemicals in the tank at approximately the recommended temperature, and did
JC> not find my results significantly affected by any deviation from the
JC> standard.  THere will be those who will say that you absolutely must
JC> maintain the baths at +/- .5 degrees of recommendation - too pure for me,
JC> and too hard to do at home without expensive equipment.

>> What is the best kind of chemicals/developer setup?

JC> Try a Kodak Ektachrome processing kit - you can get them in various sizes,
JC> and from memory the smallest will do about three rolls.

>>
>> Francis
>>
>> *PENTAX SAMURAI*
>>

JC> HTH

JC> John Coyle
JC> Brisbane, Australia 

Reply via email to