Welcome to thwe group. You should be able to get your manual from Pentax GmbH in Hamburg - they now fulfill the tasks of Pentax European Headquarters. The manual should be available in about 15 different languages.
Pentax GmbH Attn: International Sales Dept (Photo) Julius-Vosseler Strasse 104 D-22527 Hamburg Germany Pentax Functions 1 Activation or termination of audible PCV signals. [1] signal on [2] signal off 2 Selection of four different program lines. [1] Normal program line [2] faster shutter speed [3] smaller aperture [4] TF-priority 3 Number of auto bracketing frames (two, three or five frames). [1] 3 exposures [2] 2 exposures [3] 5 exposures. 4 Order of auto bracketing frames (±0 basis, ascending order or descending order). [1] starts at 0 EV then ‘-‘ then ‘+’ [2] ‘-‘ ‘0’ ‘+’ [3] ‘+’ ‘0’ ‘-‘ 5 Selection of auto-exposure and autofocus correlation (priority of metered values in multi-pattern metering) [1] AF only [2] AF and AE 6 Activation or termination of a link between autofocus lock and exposure lock functions. [1] AF only (no AE lock) [2] AF and AE lock 7 DX sensitivity selection [1] DX set auto [2] manual ISO setting 8 Selection of focus point follow-up function (adjacent focus point is activated or not when the middle point cannot confirm in-focus). [1] Use next point [2] do not use next point 9 Permission or prevention of shutter release before the built-in flash is fully recharged. [1] shutter can be released [2] shutter can not be released 10 Selection of the built-in flash’s function in the wireless remote control mode (use as flash or controller when combined with the optional AF360FGZ flash unit). [1] sets built-in flash to operate as a flash [2] sets the built-in flash as wireless flash controller 11 Selection of the illuminator button’s function in the wireless remote control mode (use for test emission or modeling emission when combined with the optional AF360FGZ flash unit). [1] Disable the flash to fire [2] sets to fire a =test flash [3] sets to fire a modeling light 12 Selection of the film leader’s handling during film rewind (complete rolling into the cartridge, or leaving the leader out of the cartridge when the film is rewound at the end or in mid-roll). [1] rewinds the film completely [2] Leaves the film leader out [3] Leaves the film leader out and enables MRC (mid-roll change) frame advance 13 Selection of rewind operation at film end [1] rewind is started automatically [2] rewind is started manually. 14 Selection of the self-timer’s operation time (two or 12 seconds). [1] Self-timer delay 12 seconds [2] Self-timer 2 seconds with mirror lock-up 15 Selection of an illumination level for on-the-film data recording (from four levels). [1] Auto according to ISO [2] low density [3] medium density [4] high density 16 Selection of the functions with a half press on the shutter release button (both the metering and autofocus systems are activated, or only the metering system). [1] Metering and AF 2[] Metering only 17 Selection of the select dial’s turning direction. [1] numeric values increase with counter-clockwise rotation [2] numeric values increase with clockwise rotation 18 Selection of the lens mount index’s illuminator [1] turned on [2] turned off. 19 Setting of the delay time of a shutter release and the signal reception stand-by time when using an infrared remote controller. [1] shutter release after 3 seconds [2] immediate release (These functions are available only when the optional BG-10 battery grip is mounted on the MZ-S). _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .