Yes. This method works so well for me, I now always keep a right sized rubber band with the filter.

-bmw

On 11-03-07 2:12 PM, Kenneth Waller wrote:
Or a large rubber band that will give your hand some traction on both the 
rotating part and the screwed thread part - has always worked for me.


-----Original Message-----
From: "P. J. Alling"<[email protected]>
Subject: Re: screwed by filters

I don't think the flexible rubber jar opener will work for this job.
The polarizer is designed to turn freely.  You're really going to have
to find a filter wrench.

On 3/7/2011 10:03 AM, Stan Halpin wrote:
There is such a thing as a filter wrench designed for this contingency. An alternative is 
to buy a large rubber "cork" whose diameter on the top or bottom flat is the 
same as the inside clearance on the front of the filter. Buying slightly oversize is an 
alternative. One approach is to press the flat of the rubber cork against the glass and 
then turn, a second is to place the larger flat of the rubber cork against the front rim 
of the filter and turn . . . YMMV

stan

On Mar 7, 2011, at 9:31 AM, Krisjanis Linkevics wrote:

Need advice on unscrewing a thin circular polarizer from my 14mm. I thought I 
screwed it on at below freezing but it turns out it has screwed me and now 
refuses to unscrew.

Note to self - you were right all along in that filters are devilish little 
thingies and you should stay as far from them as humanly possible. Seriously 
though I don't see the attraction but maybe I am just fooled by the few bad 
experiences I have had during the years.

kris


--
Where's the Kaboom?  There was supposed to be an Earth-shattering Kaboom!

        --Marvin the Martian.

________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com



--
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to