I did exactly as Derek said in make test (copied that from his email). I
also tried to find which step failed, but it was hard to link a specific
error with the install failure, only at the end of make install, it says
"... install seems impossible", so in PDL2.4.3 installation I did not
know what the problem was and what I could do differently. The perlV
file is attached.
On Fri, 2008-06-27 at 13:00 -0400, Chris Marshall wrote:
> I don't see *any* errors in the attached log.
>
> There were no results from "make test".
>
> Could you please run the make test as described
> by Derek below?
>
> Also, please run perl -V and save to file and
> attach with the test logs.
>
> It would help if you would mention what lines
> in the log file corrsponds to the error with the
> install you had.
>
> Thanks,
> Chris
>
>
> 2008-06-27, Fred Peng wrote:
> >
> > Hello guys. I attached the log file.
> > I just added PREFIX=/home/fpeng for
> > Makefile.PL this time. And the messages
> > look familiar to what I got using
> > superuser, so hopefully it can help a
> > bit for your diagnostics...
>
> > 2008-06-26 at 18:18 -0600, Derek Lamb wrote:
> >>
> >> Not that I'm aware of, but only
> >> because we never got an explicit
> >> diagnosis of the problem from Fred.
> >> I'll CC him here.
> >>
> >> Fred, could you please try the 2.4.3
> >> source install again, and let us know
> >> what steps you took, what the output
> >> is, and where the failure occurs?
> >> Running the commands like so:
> >>
> >> perl Makefile.PL 2>&1 >pdl-build-log.txt
> >> make 2>&1 >>pdl-build-log.txt
> >> make test 2>&1 >>pdl-build-log.txt
> >>
> >> will pipe everything to
> >> pdl-build-log.txt, which you can gzip
> >> and attach to your response. This
> >> will be helpful for 1) our upcoming
> >> 2.4.4 release, and 2) getting you a
> >> better PDL version installed.
> >>
> >> thanks,
> >> Derek
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.9-55.0.9.elsmp, archname=i386-linux-thread-multi
uname='linux hs20-bc1-6.build.redhat.com 2.6.9-55.0.9.elsmp #1 smp tue sep
25 02:16:15 edt 2007 i686 i686 i386 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2
-fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386
-mtune=generic -fasynchronous-unwind-tables -Dversion=5.8.8
-Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc.
-Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr
-Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles
-Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog
-Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly
-Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto
-Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto
-Ud_endservent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.7 5.8.6
5.8.5 -Dscriptdir=/usr/bin'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic
-fasynchronous-unwind-tables',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-Wdeclaration-after-statement -I/usr/local/include -I/usr/include/gdbm'
ccversion='', gccversion='4.1.1 20070105 (Red Hat 4.1.1-52)',
gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.5.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.5'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E
-Wl,-rpath,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic
-fasynchronous-unwind-tables -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API
Built under linux
Compiled at Oct 23 2007 12:21:47
@INC:
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/site_perl/5.8.8
/usr/lib/perl5/site_perl/5.8.7
/usr/lib/perl5/site_perl/5.8.6
/usr/lib/perl5/site_perl/5.8.5
/usr/lib/perl5/site_perl
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.8.8
/usr/lib/perl5/vendor_perl/5.8.7
/usr/lib/perl5/vendor_perl/5.8.6
/usr/lib/perl5/vendor_perl/5.8.5
/usr/lib/perl5/vendor_perl
/usr/lib/perl5/5.8.8/i386-linux-thread-multi
/usr/lib/perl5/5.8.8
.
_______________________________________________
Perldl mailing list
[email protected]
http://mailman.jach.hawaii.edu/mailman/listinfo/perldl
