here you go and thanks for your time! [EMAIL PROTECTED] root]# lsmod Module Size Used by Not tainted vfat 13012 0 (autoclean) fat 38808 0 (autoclean) [vfat] i810_audio 27720 0 (autoclean) ac97_codec 13640 0 (autoclean) [i810_audio] soundcore 6404 2 (autoclean) [i810_audio] parport_pc 19076 1 (autoclean) lp 8996 0 (autoclean) parport 37056 1 (autoclean) [parport_pc lp] sd_mod 13516 0 (unused) iscsi_module 153644 2 scsi_mod 107160 2 [sd_mod iscsi_module] autofs 13276 0 (autoclean) (unused) e100 60644 1 microcode 4668 0 (autoclean) keybdev 2976 0 (unused) mousedev 5492 1 hid 22148 0 (unused) input 5856 0 [keybdev mousedev hid] usb-uhci 26444 0 (unused) usbcore 78880 1 [hid usb-uhci] ext3 88328 2 jbd 51892 2 [ext3]
[EMAIL PROTECTED] root]# cat /proc/scsi/scsi Attached devices: none [EMAIL PROTECTED] root]# The Card is an Adaptec AHA-2940U /UW/D AIC-7881U (taken straight from the pci section under control panel in KDE) Let me know if you need anything else and again thanks for the help! ----- Original Message ----- From: "Thomas Dodd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 13, 2003 10:33 AM Subject: Re: Adding scsi card > > > Ross Ferson wrote: > > the data off of it. I am running RH 8.1 with NO scsi drives. It is an > > I guess you meant Red Hat Linux 8.0.9x (2,3, or 4) aka phoebe, since > there is not Red Hat x.y nor is there a Re Hat Linux 8.1 yet (if ever :) > > > edit2: RH8.1 sees the card (kudzu detected it and config'd upon startup) > > but i can't seem to mount the drive. the adaptec bios sees it fine > > (both card and drive and it assigns D: to drive.) HELP!!! thanks a lot > > Which card is it? > > After kudzu detects it, the modules should be loaded. Can you post the > output from lsmod? > > Also, what does /proc/scsi/scsi list? > > -Thomas > > > > > -- > Phoebe-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/phoebe-list > -- Phoebe-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/phoebe-list
