Congratulations. You never know when you will find a gem. The thrill of
finding something that you collect is exhilarating.
From the Desk of
Kat Hall
Executive Assistant to Ms. Smith (Publisher)
Review Coordinator
Author Liaison
www.champagnebooks.com
www.carnalpassions.com
www.thewritersvineyard.com
--------------------------------------------------
From: "Andrew Baron" <a...@popyrus.com>
Sent: Monday, October 19, 2009 5:45 PM
To: "Antique Phonograph List" <phono-l@oldcrank.org>
Subject: [Phono-L] Never thought it would happen to me
From time to time, I've derived vicarious pleasure from reading of some
of the phono-L members' coincidental discovery and acquisition of a
particularly sought-after or scarce phonograph.
In general, most of the membership are in areas that are either more
populated, or nearer to denser metropolitan areas than here in Santa Fe,
NM. Roll back the calendar a few decades, and my region is pretty
sparsely populated, with more ranching than any kind of manufacturing or
other work that would draw a larger population.
Fewer people = fewer manufactured goods, including phonographs. Add to
this the budget for a machine that most New Mexicans had (or prioritized
for music) a century or so ago, and you have relatively few phonographs
to begin with, and most of those in the low-to-middle cost range. Edison
Standards, Victrola IV's, X's and XI's, and low- end Columbias are
inevitably the models that turn up, and usually in none too good a
condition if not out of a collection. Naturally some desirable machines
were brought here later on, but by and large this hasn't amounted to
anything significant, and there isn't much of a collecting community
here.
So opportunities to build a collection are rather limited. That being
said, I started collecting in 1974, when I was 12, and my Victor 8-30X,
Edison maroon Gem, Edison early A-250 and a Zonophone Grand Opera were
all acquired here in Santa Fe, current population 72,000. Not exactly a
small town, but outside of Albuquerque, we are geographically isolated
from the big population centers. The Zonophone was brought here from New
England in the '70s, when its past owner moved here.
To the subject at hand:
Two days ago, a big local consignment shop was having their annual Fall
sale; everything 30% off. This event draws what seems like half of Santa
Fe, and while my wife and I usually attend it, we generally wait until
late in the day to avoid the pressing crowds. Anyway, most of what the
shop sells is vintage furniture, rugs, artwork, etc., some of it quite
nice, but rarely anything of particular interest to a phonograph
collector, so no penalty for arriving when convenient.
We had been browsing around for about a quarter of an hour when the
proprietor let me know that there were "a couple of Victrolas" in the
next room. We continued looking around in the part of the store where we
currently were, and after about ten minutes more, I finally said that I'd
like to take a look and see what the phonographs were. We headed
casually across the distance, through the crowds of people and things
toward the next room. No sooner had I uttered the words "These machines
are going to be examples of the most common models, and probably
overpriced", than I could see the unmistakable silhouette of Victor XVII
or XVIII, just sticking out beyond the wall separating the rooms.
Quickening my pace (they were still 20 feet away), I prepared my mind to
see a Victor XVII, the alternative possibility being somewhat beyond my
powers of imagination. Still, a Victor XVII would be a great find
although I already own one (courtesy of a very kind tip from a thoughtful
phono-L member, $200, and a 125 mile round-trip to Albuquerque).
Coming up alongside the curvy machine, I noticed first that the top curl
of the rear corner post was mostly missing -- a clean break from bashing
the machine into a wall or truck bed, no doubt. I also noticed the fine,
expressive trim on the cabinet side and the chevron- shaped veneer pattern
and practically leapt the last couple of feet so I could see the front of
the machine, which left no doubt.
There's something unbelievable about finding a top-end machine in New
Mexico, and even though I have the XVII, and was already well aware of
the differences, I had to see the VV-XVIII on the ID plate with my own
eyes. The 3-digit serial number was also a strange thing to behold on a
New Mexico Victrola. This was a dirty, dusty machine, with some of its
edges and trim scraped up from careless handling, but at a glance, in
generally good and very solid shape except for a few scrapes and that
broken-off upper rear corner piece. Definitely not something out of
someone's phonograph collection, and just as you like to find them --
clearly untouched for decades.
A quick appraisal of what it had to offer revealed:
Original gold V key;
Gold needle cup, all original casters, all correct knobs, front and back;
Large, gold crank escutcheon detached and screws missing, but still
sitting on the crank about a half-inch out from the side of the cabinet;
Near perfect felt on the platter;
Almost certainly the original gold Exhibition soundbox, Ser. #87347B,
never rebuilt;
Very, very dirty under the lid and in general (what is this greasy, black
stuff?);
Most of the record storage area filled with (non-Victor) matched albums
full of classical records, and otherwise stuffed to the gills with sheet
music;
Missing the lower key escutcheon and motor lift knob (and that
maddeningly absent corner curl).
Price, $650, minus 30%.
Sold!
It's home now, and I'm having fun cleaning it up and getting more
intimately familiar with its exquisite details, and learning why this
model is so prized. It's going to be quite nice, ultimately, with a
respectable original finish, after a many hours of carefully applied
elbow grease and the appropriate preparations. The fancy work and doors
on the back with their gold-plated hardware, concealing a nice
compartment came as a complete surprise. You never see this view in the
books. The motor is relatively clean (very little of the usual greasy
build-up, just a yellowed film of old hard residue). A couple drops of
oil in all the pertinent places, and a light coat of fresh grease on the
governor worm, and it runs very quietly and evenly. Even the speed
indicator works. The main springs thud something awful when winding down
though, so I'll treat the motor to a proper tear- down and rebuild when I
attend to those noisy springs.
Comparing the total production of the spring-motor XVIII to the number of
Victrolas produced puts it at something like 0.0004 of the total 1906 -
1929 production, and .0009 of the 1906-1920 production total (Roman
numeral model-number era). This equates to less than one-tenth of one
percent of the total production of the early Victrola era, and less than
half of that when considering the total Victrola era, if I did my math
right.
Finally (for those who've had the patience to read this far), the gold-
plated motor lift knob was found in the needle cup, and the broken-off
upper-rear corner was found otherwise undamaged, in a recess of the
cabinet. It proved a seamless fit to the fracture surface. Anyone got a
key escutcheon?
I hope you've enjoyed this story, still fresh from the event and
accurately conveyed, and I wish similarly exciting phonograph discoveries
for those of you who have not yet had the pleasure.
Kindest regards,
Andy Baron
_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org
_______________________________________________
Phono-L mailing list
http://phono-l.oldcrank.org
