Mam problem z wypalaniem płyt CD na jajku 2.6. [EMAIL PROTECTED] cdtemp]$ cdrecord dev=ATA -scanbus Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling cdrecord: Warning: Running on Linux-2.6.7 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: 'ATA' devname: 'ATA' scsibus: -2 target: -2 lun: -2 Warning: Using badly designed ATAPI via /dev/hd* interface. Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. scsibus1: 1,0,0 100) 'LG ' 'DVD-ROM DRD8080B' '1.04' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [EMAIL PROTECTED] cdtemp]$
Dlaczego nie mam tutaj nagrywaki, tylko samo DVD??? Kernel sam automatycznie "wie", że ma emulować nagrywarkę jako napęd scsi i to robi? [EMAIL PROTECTED] root]# cdrecord dev="0,0,0" -checkdrive Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling cdrecord: Warning: Running on Linux-2.6.7 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.5.31 Using libscg version 'schily-0.8'. Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'RICOH ' Identifikation : 'CD-R/RW MP7163A ' Revision : 'BR08' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R [EMAIL PROTECTED] root]# Posiadam jajko: [EMAIL PROTECTED] quickest]$ rpm -q kernel kernel-2.6.7-3 [EMAIL PROTECTED] quickest]$ Posiadam następujące napędy: [EMAIL PROTECTED] quickest]$ dmesg |grep hd (..) hdc: LG DVD-ROM DRD-8080B, ATAPI CD/DVD-ROM drive hdd: RICOH CD-R/RW MP7163A, ATAPI CD/DVD-ROM drive (...) [EMAIL PROTECTED] quickest]$ Tymczasem... niewiem dlaczego i jak to jest, ale DVD-ROM to /dev/hdd <- jest ok CD-RW to /dev/scd0 mimo, iż powinno być /dev/hdc <- dlaczego??? [EMAIL PROTECTED] root]# mount /dev/hdd /mnt/cdrw/ mount: /dev/hdd is not a valid block device [EMAIL PROTECTED] root]# Wypalanie w X-cdroast wygląda następująco (a wygląda to tak, że wkładam czystą płytkę do nagrywarki, po czym ona myśli, myśli... (jakieś 20/30 sekund) a dzieję się to przy "Performing OPC", po czym wypluwa zaraz płytkę i nie rozpoczyna sesji, ani wypalania): ------------------------------------------- Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0" gracetime=2 fs=4096k driveropts=burnfree,noforcespeed -v -useinfo speed=12 -dao -eject -pad -data "/home/users/quickest/cdtemp/track-01.iso" ... cdrecord: Warning: Running on Linux-2.6.7 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.5.31 SCSI buffer size: 64512 Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'RICOH ' Identifikation : 'CD-R/RW MP7163A ' Revision : 'BR08' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 4194304 = 4096 KB pregap1: -1 Track 01: data 606 MB padsize: 30 KB Total size: 696 MB (69:02.65) = 310699 sectors Lout start: 697 MB (69:04/49) = 310699 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11607 (97:27/18) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 49150 Forcespeed is OFF. Starting to write CD/DVD at speed 12 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... <- tutaj nagrywarka zaczyna myśleć cdrecord: Input/output error. send opc: scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 91 AD 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x91 Qual 0xAD (vendor unique sense code 0x91) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 38.464s timeout 200s cdrecord: OPC failed. Writing time: 41.156s BURN-Free was never needed. cdrecord: fifo had 64 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. ------------------------------------------- Zatem co jest nie tak??? Dlaczego nie mogę wypalić żadnej płytki potrzebna jest mi jakaś emulacja? wpisy do /etc/modules.conf czy gdzieś indziej ? A może jeszcze coś innego? Będę wdzięczny za jakiekolwiek wskazówki, a najlepiej jak podpowiedział mi ktoś, kto już wypala płytki mając jajko 2.6.x? -- Jakub "Quickest" Kozicki IMSIS, Bydgoszcz .mailto: q u i c k e s t <at> p l d - l i n u x <dot> n e t RLU: #273864 | "Los jest ślepy, ale trafia bez pudła." _______________________________________________ pld-users-pl mailing list [EMAIL PROTECTED] http://lists.pld-linux.org/mailman/listinfo/pld-users-pl