On Sat, 09 Oct 2004 14:28:39 +0200 Tomasz Luczak <[EMAIL PROTECTED]> wrote:
> > > Quickest wrote: > > Mam problem z wypalaniem płyt CD na jajku 2.6. > > > [..] > > Zatem co jest nie tak??? Dlaczego nie mogę wypalić żadnej płytki > > potrzebna jest mi jakaś emulacja? wpisy do /etc/modules.conf czy > > gdzieś indziej ? A może jeszcze coś innego? > > Będę wdzięczny za jakiekolwiek wskazówki, a najlepiej jak > > podpowiedział mi ktoś, kto już wypala płytki mając jajko 2.6.x? > > > wywal wszelkie ide-scsi i spróbuj tak > cdrecord .... dev=/dev/hdc > u mnie tak działa (2.6.8.1 -- Slackware 10.current) > Teraz sytuacja wygląda u mnie następująco: [EMAIL PROTECTED] root]# cdrecord -dev=ATA -scanbus Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling cdrecord: Warning: Running on Linux-2.6.7 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. scsidev: 'ATA' devname: 'ATA' scsibus: -2 target: -2 lun: -2 Warning: Using badly designed ATAPI via /dev/hd* interface. Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. scsibus1: 1,0,0 100) 'LG ' 'DVD-ROM DRD8080B' '1.04' Removable CD-ROM 1,1,0 101) 'RICOH ' 'CD-R/RW MP7163A ' 'BR08' Removable CD-ROM 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [EMAIL PROTECTED] root]# DVD-ROM to /dev/hdc CD-RW to /dev/hdd Zrobiłem tak jak mówisz... i teraz wygląda to tak, że po raz raz płytkę wypali dobrze, raz zwróci błąd, raz wypali dobrze i raz błąd... taka karuzela niewiedzieć czemu... może problem tkwi w sterownikach? [EMAIL PROTECTED] root]# readcd dev=/dev/hdd f=cd1_moh.iso Read speed: 5645 kB/s (CD 32x, DVD 4x). Write speed: 2822 kB/s (CD 16x, DVD 2x). Capacity: 310686 Blocks = 621372 kBytes = 606 MBytes = 636 prMB Sectorsize: 2048 Bytes Copy from SCSI (1,1,0) disk to file 'cd1_moh.iso' end: 310686 addr: 310686 cnt: 33 Time total: 304.256sec Read 621372.00 kB at 2042.3 kB/sec. [EMAIL PROTECTED] root]# cdrecord -v -speed=16 dev=/dev/hdd -data cd1_moh.iso cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling cdrecord: Warning: Running on Linux-2.6.7 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. TOC Type: 1 = CD-ROM scsidev: '/dev/hdd' devname: '/dev/hdd' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'RICOH ' Identifikation : 'CD-R/RW MP7163A ' Revision : 'BR08' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 4194304 = 4096 KB Track 01: data 606 MB Total size: 696 MB (69:02.50) = 310688 sectors Lout start: 697 MB (69:04/38) = 310688 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11607 (97:27/18) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 49161 Forcespeed is OFF. Starting to write CD/DVD at speed 12 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Turning BURN-Free off Performing OPC... cdrecord: Success. send opc: scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 91 AF 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x91 Qual 0xAF (vendor unique sense code 0x91) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 52.799s timeout 60s cdrecord: OPC failed. Writing time: 52.837s cdrecord: fifo had 64 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. [EMAIL PROTECTED] root]# i crash... nie wypala -- Jakub "Quickest" Kozicki IMSIS, Bydgoszcz .mailto: q u i c k e s t <at> p l d - l i n u x <dot> n e t RLU: #273864 | "Los jest ślepy, ale trafia bez pudła." -- Jakub "Quickest" Kozicki IMSIS, Bydgoszcz .mailto: q u i c k e s t <at> p l d - l i n u x <dot> n e t RLU: #273864 | "Los jest ślepy, ale trafia bez pudła." _______________________________________________ pld-users-pl mailing list [EMAIL PROTECTED] http://lists.pld-linux.org/mailman/listinfo/pld-users-pl