Hi Alan,
> -----Original Message-----
> From: Alan W. Irwin [mailto:ir...@beluga.phys.uvic.ca]
> Sent: Tuesday, November 07, 2017 11:16 AM
>
...
> It appears from your last comment that you have been testing the plplot
> project.
> Those do sound like promising results, but they are premature.
>
> The present patch was limited to just the test_ada project. So to test that
> patch you
> need to follow my test instructions above. Likely you will have to set
> CMAKE_LIBRARY_PATH to the location of the import library to get that
> comprehensive test (of test_ada) to work.
>
> Once you have complete success with the test_ada project, than I will want to
> make a similar change to the PLplot project, but I haven't done that yet.
>
Ah, I misread your previous mail. For some reason git refused to apply the
patch, but it was simple enough to do manually. I thought I had seen a message
about another file, so that perpetuated my mistake ;). I will try the test_ada
subproject later today.
Regards,
Arjen
DISCLAIMER: This message is intended exclusively for the addressee(s) and may
contain confidential and privileged information. If you are not the intended
recipient please notify the sender immediately and destroy this message.
Unauthorized use, disclosure or copying of this message is strictly prohibited.
The foundation 'Stichting Deltares', which has its seat at Delft, The
Netherlands, Commercial Registration Number 41146461, is not liable in any way
whatsoever for consequences and/or damages resulting from the improper,
incomplete and untimely dispatch, receipt and/or content of this e-mail.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Plplot-devel mailing list
Plplot-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/plplot-devel
