From: "smart penguin" <[EMAIL PROTECTED]> You might need to enable the netfilter code by compiling the squid to ./configure --enable-linux-netfilter
> httpd_accel_host virtual > httpd_accel_port 80 > httpd_accel_with_proxy on > httpd_accel_uses_host_header on This should work. > iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128 Only this single command is needed to make transparent proxy work. You might also check your kernel if the proper options are set. Under General Setup -- Networking support --Sysctl support Under Networking Options --Network packet filtering --TCP/IP networking Under Networking Options -> IP: Netfilter Configuration --Connection tracking --IP tables support --Full NAT --REDIRECT target support --Under File Systems --/proc filesystem support ..Disable the Fast Switching under Networking Options Compile the kernel and be sure to enable the IP forwarding. HTH //Glynn -- Philippine Linux Users' Group (PLUG) Mailing List [EMAIL PROTECTED] (#PLUG @ irc.free.net.ph) Official Website: http://plug.linux.org.ph Searchable Archives: http://marc.free.net.ph . To leave, go to http://lists.q-linux.com/mailman/listinfo/plug . Are you a Linux newbie? To join the newbie list, go to http://lists.q-linux.com/mailman/listinfo/ph-linux-newbie
