Hi,
I'm working on a design where I'm considering changing from a standard A
host connector to a type C connector. The signalling is USB 2.0, and
will remain at that speed (my host processor doesn't support speeds
above 2.0).
I optionally need ethernet in my design, so I've been looking at various
USB C hubs that integrate ethernet, and I'm curious as to what chip(s)
is being used in these hubs. Here's an example:
<https://www.anker.com/products/variant/powerexpand--5in1-usbc-ethernet-hub/A83380A1>
If you're using something like this and you have the time, I'd be
curious to see the output from the lsusb command.
thanks,
galen
--
Galen Seitz
gal...@seitzassoc.com
_______________________________________________
PLUG mailing list
PLUG@pdxlinux.org
http://lists.pdxlinux.org/mailman/listinfo/plug
