You need to have the Bullet do NAT for you. If you can get to a shell, try to get the output of: iptables -v -t nat -L to see if there is a MASQUERADE rule.
On Sun, Apr 12, 2020 at 11:32 PM Michael Barnes <barnmich...@gmail.com> wrote: > OK, got the Bullet M2, antenna, POE injector, cables, etc. Hooked it all up > and got right into the management page. Followed all the instructions and > videos I could find. The need is to connect to WiFi from my RV. Per the > instructions, I set the Wireless settings to Station, choose an access > point from the survey list, set Networking to Router, set IP address, DHCP > range, etc. > My laptop connects and pulls DHCP, and I can access the management page on > the Bullet. My home router gives the Bullet DHCP and shows it on the > connections list. However, I cannot see anything past the Bullet from my > laptop. Looking at the routing table in the Bullet, it all looks good to my > untrained eye. But, no access from my laptop to anything other than the > Bullet. No Internet, can't see my other computers. > > Frustrated, looking for suggestions. > > Michael > _______________________________________________ > PLUG mailing list > PLUG@pdxlinux.org > http://lists.pdxlinux.org/mailman/listinfo/plug > _______________________________________________ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
