Jophnal wrote: > Hi all, no response from previous post so I'll try again. > > Done some debug loggin (all) and identified the following: > Around 1 minute into a song Squeezelite eats 1 whole thread on my 16 > thread Ryzen 1700X 100%. It continues to use 100% for around 1-2 minutes > as which point the music stops/pauses. > > Debug log shows: > > [16:07:39.094] process:521 strm > [16:07:39.094] process_strm:274 strm command q > [16:07:39.094] decode_flush:237 decode flush > [16:07:39.094] output_flush:435 flush output buffer > [16:07:39.094] sendSTAT:189 STAT: STMf > [16:07:39.386] process:521 audg > [16:07:39.386] process_audg:433 audg gainL: 3840 gainR: 3840 adjust: 1 > [16:07:39.386] set_volume:111 setting internal gain left: 3840 right: > 3840 > [16:07:39.389] process:521 strm > [16:07:39.389] process_strm:274 strm command s > [16:07:39.389] process_strm:344 strm s autostart: 1 transition period: > 10 transition type: 0 codec: m > [16:07:39.389] sendSTAT:189 STAT: STMf > [16:07:39.389] codec_open:265 codec open: 'm' > [16:07:39.389] _tcp_connect:486 connecting to 192.168.1.103:9000 > [16:07:39.399] stream_sock:577 header: GET > /stream.mp3?player=b4:2e:99:1f:6e:7d HTTP/1.0 > > > > > [16:07:39.399] sendSTAT:189 STAT: STMc > [16:07:39.399] process_strm:377 set fade mode: 0 > [16:07:39.399] process:521 audg > [16:07:39.399] process_audg:433 audg gainL: 3840 gainR: 3840 adjust: 1 > [16:07:39.399] set_volume:111 setting internal gain left: 3840 right: > 3840 > [16:07:39.499] stream_thread:247 headers: len: 116 > HTTP/1.1 200 OK > > Server: Logitech Media Server (7.9.2 - 1578996832) > > Connection: close > > Content-Type: audio/mpeg > > > > > [16:07:39.500] sendRESP:220 RESP > [16:07:39.601] mad_decode:244 setting track_start > [16:07:39.601] mad_decode:273 gapless: skipping 529 frames at start > [16:07:39.601] mad_decode:232 mad_frame_decode error: lost > synchronization > [16:07:39.601] mad_decode:232 mad_frame_decode error: reserved sample > frequency value > [16:07:39.601] mad_decode:232 mad_frame_decode error: lost > synchronization > [16:07:39.602] mad_decode:232 mad_frame_decode error: bad > main_data_begin pointer > [16:07:39.615] _output_frames:64 start buffer frames: 107759 > [16:07:39.615] _output_frames:149 track start sample rate: 44100 > replay_gain: 0 > [16:07:39.615] pa_callback:525 pad with silence > [16:07:39.615] sendSTAT:189 STAT: STMs > [16:07:39.615] sendSTAT:189 STAT: STMt > [16:07:39.912] stream_thread:320 end of stream > [16:07:39.912] sendDSCO:208 DSCO: 0 > [16:07:39.978] process:521 strm > [16:07:39.978] process_strm:274 strm command t > [16:07:39.978] sendSTAT:189 STAT: STMt > [16:07:40.979] sendSTAT:189 STAT: STMt > [16:07:42.980] sendSTAT:189 STAT: STMt > [16:07:43.979] process:521 strm > [16:07:43.979] process_strm:274 strm command t > [16:07:43.979] sendSTAT:189 STAT: STMt > [16:07:44.979] sendSTAT:189 STAT: STMt > [16:07:46.979] sendSTAT:189 STAT: STMt > [16:07:47.850] process:521 audg > [16:07:47.850] process_audg:433 audg gainL: 0 gainR: 0 adjust: 1 > [16:07:47.850] set_volume:111 setting internal gain left: 0 right: 0 > [16:07:47.850] process:521 strm > [16:07:47.850] process_strm:274 strm command p > [16:07:47.850] sendSTAT:189 STAT: STMp
Unfortunately, I don't have a clue. Is this only when squeezelite-win.exe is running under SLX? Or is it a squeezelite-win issue? R Greg Dawson Squeezelite-X ------------------------------------------------------------------------ rgdawson's Profile: http://forums.slimdevices.com/member.php?userid=65236 View this thread: http://forums.slimdevices.com/showthread.php?t=108550 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
