firebelli wrote: > Hello philippe, thank you for your attention. > > The main issue I have been facing is unexpected termination of play and > then disappearance of virtual player for my Pioneer speaker XW-SMA3. It > happens more often with wifi connection than wired network. > The typical error code is "685 uPNP search timeout" in following log > sequence. > > Code: -------------------- > > [10:17:42.906592] sq_read:634 [0x8158c40]: read 65280 (r:65280 w:300) > [10:17:43.382053] sq_read:634 [0x8158c40]: read 65280 (r:65280 w:300) > [10:17:43.797246] sq_read:634 [0x8158c40]: read 65280 (r:65280 w:300) > [10:17:44.000552] CallbackEventHandler:685 uPNP search timeout > [10:17:44.000667] CallbackEventHandler:719 [0xb2c06938]: removing renderer (Pioneer Speaker) > [10:17:44.000710] slimproto_close:991 [0x8158c40] slimproto stop for Pioneer Speaker > [10:17:44.000762] output_mr_close:552 [0x8158c40] close media renderer > [10:17:44.092871] decode_close:180 close decode > [10:17:44.093004] stream_close:333 [0x8158c40] close stream > -------------------- > > > > Also this issue may occur in ramp up/down of volume with speaker > buttons, or switching on/off of other DLNA renderers (AV amplifier, TV > or PC.) sq2u monitors and recognizes all the DLNA renderers on home > network even if the addition of undefined renderers to LMS is > disabled, and may fail. > > <streambuf_size>, <stream_length>, <max_read_wait> and <max_GET_bytes> > parameters have been changed as trials to improve the stability. The > effects of changing values from the default are not fully clear. > > XW-SMA3 works correctly while controlled from foobar2000 with DLNA > plugin, so it might not a network issue. > I would test again in following days, comparing default setting and > the modified, and provide the result. > > Regarding <accept_nexturi>, for XW-SMA3 this value should be 0 to > avoid song-skipping. I could reproduce this symptom, restoring other > values as default. Please take a look at the attachment as zipped > configs and logs in two cases. > > Original song order is: > > > - Field Day For Sundays - Three Girl Rumba - Ex.Lion Tamer - ... > > > > ...and the song #2 was skipped when <accept_nexturi> was '1'. Runs > correctly when the value is '0'. > > I appreciate your comment in advance.
Thanks for the clear log & feedback. To solve problem #1 and if your uPnP device configuration does not change, use the <upnp_scan_interval> to 0. That will totally prevent the rescan of upnp devices. Some devices tend to not respond in time (quick enough) to the regular upnp rescan process and then are removed from the list. But if your config does not change, you do not need a rescan. I will also add a parameter in 0.2.0.0 to give more time to rescan LMS 7.7.2 - 5 radio, 3 Boom, 4 Duet, 1 Touch, 1 SB2. Sonos 2xPLAY:1, PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBMC, Foobar2000, XBoxOne (sort of) ------------------------------------------------------------------------ philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=102496 _______________________________________________ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
