Parky wrote:
> Firstly I want to say a great thanks to bpa and everyone else who's put
> together tools, found URLs, badgered those in power and generally got us
> near a point where we can get iPlayer back on the Squeezebox world.
>
> I've put a bit of work together to get my combined squeezeplug/and
> squeezelite running on a Raspberry Pi, and am now listening to 6music.
> See below for some alternate scripts/programs.
>
>
>
> Yes I was seeing this also with avconv. It's an unrecognised
> command-line option and so causes ffmpeg/avconv to fail.
>
>
>
> I too was not having a good time with the shell script so have lashed
> together a perl one which on my RaspberryPi B is a bit more robust.
>
> You should put the script in the same directory as bpa's shell script
> (e.g. /usr/local/bin on Linux). Of course you'll need to edit the
> custom-convert.conf to change it to run playhls.pl:
> >
Code:
--------------------
> >
> # PlayHLS rules to start convert application for Linux
> hls mp3 * *
> # RB:{BITRATE=-B %B}T:{START=-ss %s}
> [playhls.pl] -loglevel quiet -i $FILE$ -f wav - | [lame] --silent -q
$QUALITY$ $BITRATE$ - -
>
> hls pcm * *
> # RB:{BITRATE=-B %B}T:{START=-ss %s}
> [playhls.pl] -loglevel quiet -i $FILE$ -f s16le -
>
> hls flc * *
> # RB:{BITRATE=-B %B}T:{START=-ss %s}
> [playhls.pl] -loglevel quiet -i $FILE$ -f flac -
>
--------------------
> >
>
> And then restart the squeezebox server (ie. sudo
> /etc/init.d/logitechmediaserver restart)
>
> As mentioned above I decided to go down running avconv. I built the
> latest one from one from http://libav.org/download.html
>
> I built it directly on my Raspberry Pi as I don't have cross-compiler
> tools and wanted to make sure i built it with hardware floating-point.
> Note though it takes 4 hours to build on a RasPi. In case anyone is
> interested and has only a little Linux knowledge, but is able to login
> to a shell on their RasPi, here are the set of commands to go about
> it:
>
> >
Code:
--------------------
> >
> $ cd $HOME
> $ mkdir av_build
> $ cd av_build
> $ wget https://libav.org/releases/libav-11.2.tar.gz
> $ tar xzf libav-11.2.tar.gz
> $ cd libav-11.2
> $ CFLAGS="-mfloat-abi=hard -mfpu=vfp" configure
> # Note the above takes a good couple of minutes to configure and it doesn't
tell you anything while it is doing it.
> $ make
> # Wait 4+ hours, you'll then have a avconf executable. Install it with:
> $ sudo make install
>
--------------------
> >
>
> I'm not sure what the rules are with binaries, but if it's OK then I
> could also post out the version of avconv I built (on a debian armv6
> 3.10.25+ kernel with gcc version 4.6.3).
>
> Thanks once again everyone.
But ... does this suffer the same ffmpeg incrementing problem?
Touch - Muse M50 EX TPA3123 T-Amp Mini - Acoustics Q10 speakers
Logitech Radio
Logitech UE Smart Radio
Raspberry Pi + Squeezeplug LMS + Squeezelite - Logitech Mini Boombox
speaker (mothballed)
Cubieboard + Debian 7 + LMS 7.8.1 + Squeezelite - Soundwave SW100
bluetooth speaker
O2 Joggler + SqpOS + Aune X2 T-amp + Mordaunt Short ms-3.40 speakers
IBOX + Debian 7 + LMS 7.8.1 + Squeezelite - Soundwave SW100 bluetooth
speaker
Squeeze2upnp - Sonos Play1 & Vistron internet radio (Reciva)
------------------------------------------------------------------------
castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624
View this thread: http://forums.slimdevices.com/showthread.php?t=53229
_______________________________________________
plugins mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/plugins
