Courtney: You are so right. Mine eyes have seen the light. :) Can't believe I missed that. lol
Thanks, On Wed, Jun 27, 2012 at 2:54 PM, Courtney Bane <[email protected]> wrote: > On Wed, Jun 27, 2012 at 10:00:14AM -0400, AlbyVA wrote: > > Is anybody having issues with adding a v6 server into the pool via the > > website site? > > > > I'm trying to add ( 2001:470:7:104::2) and I'm getting this error: > > > > Didn't get an NTP response from 2001:470:7:104::2 > > I'm fairly certain that your problems are coming from using the wrong > IPv6 address. That address is for an HE tunnel, and is the "Client IPv6 > Address" for the tunnel. You'll need to assign and use an address out of > the "Routed /64" (which should be 2001:470:8:104::/64 for you, but check > the config page for the tunnel to make sure). > > I don't recall you mentioning what distro you're running, but here's the > relevant parts of my /etc/network/interfaces on Debian: > > ---/etc/network/interfaces----------------- > auto eth0 inet6 static > address <an address from my routed /64> > netmask 64 > auto he-ipv6 > iface he-ipv6 inet6 v4tunnel > endpoint <server IPv4 address> > address <client IPv6 address> > gateway <server IPv6 address> > netmask 128 > up ip -6 addr change <client IPv6 address>/128 dev he-ipv6 > preferred_lft 0 > ------------------------------------------ > (also available at https://cbane.org/etc-network-interfaces.txt) > > The "up ip ..." line marks the tunnel address as deprecated, so that > IPv6 traffic originating from the system will use the address from the > routed /64 instead. > _______________________________________________ > pool mailing list > [email protected] > http://lists.ntp.org/listinfo/pool >
_______________________________________________ pool mailing list [email protected] http://lists.ntp.org/listinfo/pool
