# ntpdate -q godzilla.empire.org server 2001:470:8:104::2, stratum 1, offset 0.003384, delay 0.13257 server 69.25.29.12, stratum 0, offset 0.000000, delay 0.00000 27 Feb 14:45:42 ntpdate[9402]: adjust time server 2001:470:8:104::2 offset 0.003384 sec
it seems the ntp server is running properly but not listening on the IPv4 address or the requests are filtered by a firewall 2013/2/27 AlbyVA <[email protected]> > What would be causing me to get this error when trying to add a server? > > godzilla.empire.org > > 69.25.29.12 > Invalid stratum response from 69.25.29.12 (Your server is in stratum > ). Is your server configured properly? Is public access allowed? If > you just restarted your ntpd, then it might still be stabilizing the > timesources - try again in 10-20 minutes. > > 2001:470:8:104::2 > 2001:470:8:104::2 is already listed in your account. > > > > As a side note, the very same server is running IPv6 and is in the > pool without issue. So I'd be hard pressed to believe it was a config > issue for only v4 when v6 is working. > > assID=0 status=04fd leap_none, sync_uhf_clock, 15 events, event_13, > version="ntpd [email protected] Mon Feb 20 22:00:33 UTC 2012 (1)", > processor="amd64", system="FreeBSD/9.0-RELEASE-p3", leap=00, stratum=1, > precision=-19, rootdelay=0.000, rootdisp=0.265, refid=PPS, > reftime=d4d8853e.5997e3dc Wed, Feb 27 2013 8:14:38.349, > clock=d4d8853f.d093c61a Wed, Feb 27 2013 8:14:39.814, peer=49467, > tc=4, mintc=3, offset=-0.014, frequency=-23.540, sys_jitter=0.002, > clk_jitter=0.000, clk_wander=0.000 > > > > > -Alby > _______________________________________________ > pool mailing list > [email protected] > http://lists.ntp.org/listinfo/pool >
_______________________________________________ pool mailing list [email protected] http://lists.ntp.org/listinfo/pool
