Doh... Let me look into that one. Thanks. Maybe I've screwed something up on the v4 side and not the v6 side with regards to firewall/routing.
-Alby On Wed, Feb 27, 2013 at 8:37 AM, Peter Hessler <[email protected]> wrote: > I cannot connect to your IPv4 address from Germany. No responses when I > send an NTP packet. Firewall? > > On 2013 Feb 27 (Wed) at 08:14:56 -0500 (-0500), AlbyVA wrote: > : What would be causing me to get this error when trying to add a server? > : > :godzilla.empire.org > : > :69.25.29.12 > :Invalid stratum response from 69.25.29.12 (Your server is in stratum > :). Is your server configured properly? Is public access allowed? If > :you just restarted your ntpd, then it might still be stabilizing the > :timesources - try again in 10-20 minutes. > : > :2001:470:8:104::2 > :2001:470:8:104::2 is already listed in your account. > : > : > : > : As a side note, the very same server is running IPv6 and is in the > :pool without issue. So I'd be hard pressed to believe it was a config > :issue for only v4 when v6 is working. > : > :assID=0 status=04fd leap_none, sync_uhf_clock, 15 events, event_13, > :version="ntpd [email protected] Mon Feb 20 22:00:33 UTC 2012 (1)", > :processor="amd64", system="FreeBSD/9.0-RELEASE-p3", leap=00, stratum=1, > :precision=-19, rootdelay=0.000, rootdisp=0.265, refid=PPS, > :reftime=d4d8853e.5997e3dc Wed, Feb 27 2013 8:14:38.349, > :clock=d4d8853f.d093c61a Wed, Feb 27 2013 8:14:39.814, peer=49467, > :tc=4, mintc=3, offset=-0.014, frequency=-23.540, sys_jitter=0.002, > :clk_jitter=0.000, clk_wander=0.000 > : > : > : > : > :-Alby > :_______________________________________________ > :pool mailing list > :[email protected] > :http://lists.ntp.org/listinfo/pool > > -- > You're never too old to become younger. > -- Mae West _______________________________________________ pool mailing list [email protected] http://lists.ntp.org/listinfo/pool
