issue: # dmesg | grep scann uscanner0 at uhub0 port 2 uscanner0: UMAX Data Systems Astra 1220U, rev 1.00/1.00, addr 2 # usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00 port 1 powered port 2 addr 2: full speed, self powered, config 1, Astra 1220U(0x0010), UMAX Data Systems(0x1606), rev 1.00 # sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (UNKNOWN vendor and product) at device /dev/uscanner0 # Your USB scanner was detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # `UNKNOWN vendor and product' means that there seems to be a scanner at this # device file but the vendor and product ids couldn't be identified. # Currently identification only works with Linux versions >= 2.4.8. You may # need to configure your backend manually, see the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # cat /etc/sane.d/umax1220u.conf # Options for the umax1220u backend # Autodetect the UMAX Astra 1220U usb 0x1606 0x0010 # The following line enables autodetection for the # Astra 2000U and Astra 2100U. However, this driver # isn't entirely compatible, so expect color problems :) #usb 0x1606 0x0030 #usb 0x1606 0x0130 # device list for non-linux-systems (enable if autodetect fails): #/dev/scanner #/dev/usb/scanner0 usb /dev/uscanner0 # export SANE_DEBUG_UMAX1220U=255 # scanimage -L [sanei_debug] Setting debug level of umax1220u to 255. [umax1220u] sane_init: version_code != 0, authorize != 0 [umax1220u] sane_init: SANE umax1220u backend version 1.0.1 from sane-backends 1.0.16 [umax1220u] reading configure file umax1220u.conf [umax1220u] attach_matching_devices(usb 0x1606 0x0010) [umax1220u] attach_matching_devices(usb /deb/uscanner0) [umax1220u] finished reading configure file [umax1220u] sane_get_devices(local_only = 0) No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [umax1220u] sane_exit # scanimage -d umax1220u:/dev/uscanner0 [sanei_debug] Setting debug level of umax1220u to 255. [umax1220u] sane_init: version_code != 0, authorize != 0 [umax1220u] sane_init: SANE umax1220u backend version 1.0.1 from sane-backends 1.0.16 [umax1220u] reading configure file umax1220u.conf [umax1220u] attach_matching_devices(usb 0x1606 0x0010) [umax1220u] attach_matching_devices(usb /deb/uscanner0) [umax1220u] finished reading configure file [umax1220u] sane_open [umax1220u] sane_open: devicename=/dev/uscanner0 [umax1220u] attach_scanner: /dev/uscanner0 [umax1220u] attach_scanner: opening /dev/uscanner0 [umax1220u] UMAX_open_device: `/dev/uscanner0' [umax1220u] UMAX_open_device: sanei_usb_get_vendor_product failed [umax1220u] ERROR: attach_scanner: opening /dev/uscanner0 failed scanimage: open of device umax1220u:/dev/uscanner0 failed: Operation not supported [umax1220u] sane_exit ------------------------------------------------------------------------------- http://www.one.lv - Tavs mobilais e-pasts! Tagad lasi savu e-pastu ar mobilo telefonu - wap.one.lv!