On Mon, Dec 07, 2020 at 03:21:40PM +0000, Mihai Popescu wrote:
> Hello,
> 
> I have last snapshot installed, with blender-2.91.0. Then menu is very
> transparent, but I can use it somehow. When i hit Render, the gray screen
> appears and the system locks up, nothing responsive, not able to close
> Blender, change consoles, etc. I forced shut down.
> 
The transparency issue is likely due to unsupported graphics card, or
insufficient driver support.
https://blender.stackexchange.com/questions/203259/transparent-menus

Check if you've edited your driver configuration at
/usr/X11R6/share/X11/xorg.conf.d/ depending on your card.
If not this is just bad luck.

Even I face the following errors, although in my case it is triggered by some
rarely used options. Also you don't have to force shut down, try Ctrl-Alt-F1
and then restart xenodm unless that is what you meant by changing consoles.

regards,
  Dimitri

> Errors appear:
> 
> Dec  7 11:47:45 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 10000msec
> Dec  7 11:47:45 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:46 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 10500msec
> Dec  7 11:47:46 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:46 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 11000msec
> Dec  7 11:47:46 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:47 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 11500msec
> Dec  7 11:47:47 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:47 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 12000msec
> Dec  7 11:47:47 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:48 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 12500msec
> Dec  7 11:47:48 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:48 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 13000msec
> Dec  7 11:47:48 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:49 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 13500msec
> Dec  7 11:47:49 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:49 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 14000msec
> Dec  7 11:47:49 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:50 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 14500msec
> Dec  7 11:47:50 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:50 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 15000msec
> Dec  7 11:47:50 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:51 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 15500msec
> Dec  7 11:47:51 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:51 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 16000msec
> Dec  7 11:47:51 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:52 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 16500msec
> Dec  7 11:47:52 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:52 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 17000msec
> Dec  7 11:47:52 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:53 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 17500msec
> Dec  7 11:47:53 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:53 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 18000msec
> Dec  7 11:47:53 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:54 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 18500msec
> Dec  7 11:47:54 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:54 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 19000msec
> Dec  7 11:47:54 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:55 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 19500msec
> Dec  7 11:47:55 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:55 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 20000msec
> Dec  7 11:47:55 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:56 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 20500msec
> Dec  7 11:47:56 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0b on ring 0)
> Dec  7 11:47:57 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 21790msec
> Dec  7 11:47:57 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0f on ring 0)
> Dec  7 11:47:57 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 22290msec
> Dec  7 11:47:57 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0f on ring 0)
> Dec  7 11:47:58 thinkc /bsd: drm:pid21382:radeon_ring_test_lockup *ERROR*
> ring 0 stalled for more than 22790msec
> Dec  7 11:47:58 thinkc /bsd: drm:pid21382:radeon_fence_check_lockup
> *WARNING* GPU lockup (current fence id 0x0000000000000a0a last fence id
> 0x0000000000000a0f on ring 0)
> Dec  7 11:48:07 thinkc /bsd: [drm] *ERROR* radeon: fence wait timed out.
> Dec  7 11:48:07 thinkc /bsd: [drm] *ERROR* radeon: failed testing IB on
> ring 5 (-60).
> 
> dmesg:
> 
> OpenBSD 6.8-current (GENERIC.MP) #210: Sat Dec  5 08:51:43 MST 2020
>     dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8029429760 (7657MB)
> avail mem = 7770771456 (7410MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeebc0 (57 entries)
> bios0: vendor LENOVO version "9VKT33AUS" date 09/11/2013
> bios0: LENOVO 1990RZ2
> acpi0 at bios0: ACPI 4.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC TCPA MCFG SLIC MCFG HPET SSDT
> acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4)
> PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) PE20(S4) PE21(S4)
> PE22(S4) PE23(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD Athlon(tm) II X2 B26 Processor, 3192.44 MHz, 10-06-03
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully
> associative
> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully
> associative
> cpu0: AMD erratum 721 detected and fixed
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 199MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD Athlon(tm) II X2 B26 Processor, 3192.02 MHz, 10-06-03
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> 64b/line 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully
> associative
> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully
> associative
> cpu1: AMD erratum 721 detected and fixed
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 21, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpimcfg1 at acpi0
> acpimcfg1: addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (P0P1)
> acpiprt2 at acpi0: bus -1 (PCE2)
> acpiprt3 at acpi0: bus -1 (PCE3)
> acpiprt4 at acpi0: bus -1 (PCE4)
> acpiprt5 at acpi0: bus -1 (PCE5)
> acpiprt6 at acpi0: bus -1 (PCE6)
> acpiprt7 at acpi0: bus -1 (PCE7)
> acpiprt8 at acpi0: bus -1 (PCE9)
> acpiprt9 at acpi0: bus -1 (PCEA)
> acpiprt10 at acpi0: bus 2 (P0PC)
> acpiprt11 at acpi0: bus 3 (PE20)
> acpiprt12 at acpi0: bus -1 (PE21)
> acpiprt13 at acpi0: bus -1 (PE22)
> acpiprt14 at acpi0: bus 4 (PE23)
> acpipci0 at acpi0 PCI0
> acpicmos0 at acpi0
> acpibtn0 at acpi0: PWRB
> acpicpu0 at acpi0: C1(@1 halt!), PSS
> acpicpu1 at acpi0: C1(@1 halt!), PSS
> cpu0: 3192 MHz: speeds: 3200 2500 1900 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
> ppb0 at pci0 dev 1 function 0 vendor "Lenovo", unknown product 0x9602 rev
> 0x00
> pci1 at ppb0 bus 1
> radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00
> drm0 at radeondrm0
> radeondrm0: apic 3 int 18
> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 3 int 19,
> AHCI 1.2
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200AAKS-0, 40.0>
> naa.50014ee1018094dc
> sd0: 305245MB, 512 bytes/sector, 625142448 sectors
> cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DH16ABSH, YL32> removable
> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 3 int 18,
> version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 17
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
> addr 1
> ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 3 int 18,
> version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 17
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
> addr 1
> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: SMI
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
> azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 3 int
> 16
> azalia0: codecs: Realtek ALC662
> audio0 at azalia0
> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
> ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
> pci2 at ppb1 bus 2
> ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 3 int 18,
> version 1.0, legacy support
> ppb2 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 21 function 3 "ATI SB800 PCIE" rev 0x00
> pci4 at ppb3 bus 4
> bge0 at pci4 dev 0 function 0 "Broadcom BCM5761" rev 0x10, BCM5761 A1
> (0x5761100): msi, address c8:9c:dc:b2:8f:1d
> brgphy0 at bge0 phy 1: BCM5761 10/100/1000baseT PHY, rev. 0
> ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 3 int 18,
> version 1.0, legacy support
> ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 3 int 17
> usb2 at ehci2: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00
> addr 1
> pchb1 at pci0 dev 24 function 0 "AMD 10h HyperTransport" rev 0x00
> pchb2 at pci0 dev 24 function 1 "AMD 10h Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD 10h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD 10h Misc Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 4 "AMD 10h Link Cfg" rev 0x00
> usb3 at ohci0: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
> addr 1
> usb4 at ohci1: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
> addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> usb5 at ohci2: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
> addr 1
> usb6 at ohci3: USB revision 1.0
> uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00
> addr 1
> vmm0 at mainbus0: SVM/RVI
> umass0 at uhub2 port 1 configuration 1 interface 0 "SanDisk Cruzer Fit" rev
> 2.00/1.26 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.26>
> serial.07815571010812120514
> sd1: 30532MB, 512 bytes/sector, 62530624 sectors
> uhidev0 at uhub3 port 5 configuration 1 interface 0 "SIGMACH1P USB
> Keykoard" rev 1.10/1.10 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev1 at uhub3 port 5 configuration 1 interface 1 "SIGMACH1P USB
> Keykoard" rev 1.10/1.10 addr 2
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhidev2 at uhub4 port 1 configuration 1 interface 0 "Genius USB Optical
> Mouse" rev 2.00/1.00 addr 2
> uhidev2: iclass 3/1
> ums0 at uhidev2: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (6421744f982f4ecd.a) swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> radeondrm0: RS880
> radeondrm0: 1680x1050, 32bpp
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> wsmouse0 detached
> ums0 detached
> uhidev2 detached
> uhidev2 at uhub4 port 1 configuration 1 interface 0 "Genius USB Optical
> Mouse" rev 2.00/1.00 addr 2
> uhidev2: iclass 3/1
> ums0 at uhidev2: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0

Reply via email to