Re: GCC 8.4.0 fails to build on loongson

[manphiz]

Friendly ping.

On 5/27/21 1:27 AM, manp...@gmail.com wrote:

 >Synopsis:    lang/gcc/8 fails to build on loongson
 >Category:    ports
 >Environment:
     System      : OpenBSD 6.9
     Details     : OpenBSD 6.9 (GENERIC) #78: Thu Apr 22 20:28:58 MDT 2021



     Architecture: OpenBSD.loongson
     Machine     : loongson
 >Description:
         lang/gcc/8 fails to build on loongson
 >How-To-Repeat:

 >Fix:
     No idea.

dmesg:
OpenBSD 6.9 (GENERIC) #78: Thu Apr 22 20:28:58 MDT 2021

real mem = 1073741824 (1024MB)
avail mem = 1052065792 (1003MB)
random: boothowto does not indicate good seed
mainbus0 at root: Lemote Yeeloong
cpu0 at mainbus0: STC Loongson2F CPU 797 MHz, STC Loongson2F FPU
cpu0: cache L1-I 64KB D 64KB 4 way, L2 512KB 4 way
bonito0 at mainbus0: memory and PCI-X controller, rev 1
pci0 at bonito0 bus 0

rlphy0 at rl0 phy 0: RTL internal PHY

wsdisplay0 at smfb0 mux 1: console (std, vt100 emulation)
ohci0 at pci0 dev 9 function 0 "NEC USB" rev 0x44: irq 7, version 1.0
ehci0 at pci0 dev 9 function 1 "NEC USB" rev 0x05: irq 7
usb0 at ehci0: USB revision 2.0

isa0 at glxpcib0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
ykbec0 at isa0 port 0x381/3
gpio1 at glxpcib0: 32 pins
iic at glxpcib0 not configured
glxclk0 at glxpcib0: clock, prof

wd0 at pciide0 channel 0 drive 0: <FUJITSU MHZ2160BH G2>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)

ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auglx0

ehci1 at pci0 dev 14 function 5 "AMD CS5536 USB" rev 0x02: isa irq 11
usb1 at ehci1: USB revision 2.0

usb2 at ohci0: USB revision 1.0

usb3 at ohci1: USB revision 1.0

apm0 at mainbus0

umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0

urtw0: RTL8187B rev E, address 00:17:c4:4d:ea:21
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
pmon bootpath: bootduid=b0c7a9c3d196767f
root on wd0a (b0c7a9c3d196767f.a) swap on wd0b dump on wd0b

usbdevs:
Controller /dev/usb0:
addr 01: 1033:0000 NEC, EHCI root hub
      high speed, self powered, config 1, rev 1.00
      driver: uhub0
Controller /dev/usb1:
addr 01: 1022:0000 AMD, EHCI root hub
      high speed, self powered, config 1, rev 1.00
      driver: uhub1
addr 02: 0bda:0158 Generic, USB2.0-CRW

      driver: umass0
addr 03: 0bda:8189 Realtek, RTL8187B_WLAN_Adapter
      high speed, power 500 mA, config 1, rev 2.00, iSerial 00e04c000001
      driver: urtw0
Controller /dev/usb2:
addr 01: 1033:0000 NEC, OHCI root hub
      full speed, self powered, config 1, rev 1.00
      driver: uhub2
Controller /dev/usb3:
addr 01: 1022:0000 AMD, OHCI root hub
      full speed, self powered, config 1, rev 1.00
      driver: uhub3

dera...@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC         Reproducible on loongson when building using dpb.  Build log is attached. dera...@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC rl0 at pci0 dev 7 function 0 "Realtek 8139" rev 0x10: irq 5, address 00:23:8b:33:d4:7f smfb0 at pci0 dev 8 function 0 "Silicon Motion LynxEM+" rev 0xb0: 1024x600, 16bpp uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 glxpcib0 at pci0 dev 14 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c pciide0 at pci0 dev 14 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility auglx0 at pci0 dev 14 function 3 "AMD CS5536 Audio" rev 0x01: isa irq 9, CS5536 AC97 ohci1 at pci0 dev 14 function 4 "AMD CS5536 USB" rev 0x02: isa irq 11, version 1.0, legacy support uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 addr 1 uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1 umass0 at uhub1 port 1 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/58.87 addr 2 sd0 at scsibus0 targ 1 lun 0: <Generic-, Multi-Card, 1.00> removable serial.0bda0158114173400000 urtw0 at uhub1 port 4 configuration 1 interface 0 "Realtek RTL8187B_WLAN_Adapter" rev 2.00/2.00 addr 3      high speed, power 500 mA, config 1, rev 58.87, iSerial 20071114173400000

OpenPGP_signature
Description: OpenPGP digital signature