To set expectations approriately: not many developers have mips64el hardware (not sure if any ports developers do), and it seems few users do too (only 3 dm...@openbsd.org submissions since 2015 using it).
Also, there are not really many porters who can work on the gcc port. If you want better support in ports for this hardware, especially in low-level things like gcc, you're going to need to do most of the work yourself. At the bottom of your build log, it says configure: error: cannot compute sizeof (double) See `config.log' for more details. There might possibly be something useful in that file (there will be multiple config.log files in the build directory, look for the newest). Maybe the fix will be something simple, maybe not. On 2021/06/05 18:54, manp...@gmail.com wrote: > Friendly ping. > > On 5/27/21 1:27 AM, manp...@gmail.com wrote: > > >Synopsis: lang/gcc/8 fails to build on loongson > > >Category: ports > > >Environment: > > System : OpenBSD 6.9 > > Details : OpenBSD 6.9 (GENERIC) #78: Thu Apr 22 20:28:58 MDT 2021 > > dera...@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC > > > > Architecture: OpenBSD.loongson > > Machine : loongson > > >Description: > > lang/gcc/8 fails to build on loongson > > >How-To-Repeat: > > Reproducible on loongson when building using dpb. Build log is > > attached. > > >Fix: > > No idea. > > > > dmesg: > > OpenBSD 6.9 (GENERIC) #78: Thu Apr 22 20:28:58 MDT 2021 > > dera...@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC > > real mem = 1073741824 (1024MB) > > avail mem = 1052065792 (1003MB) > > random: boothowto does not indicate good seed > > mainbus0 at root: Lemote Yeeloong > > cpu0 at mainbus0: STC Loongson2F CPU 797 MHz, STC Loongson2F FPU > > cpu0: cache L1-I 64KB D 64KB 4 way, L2 512KB 4 way > > bonito0 at mainbus0: memory and PCI-X controller, rev 1 > > pci0 at bonito0 bus 0 > > rl0 at pci0 dev 7 function 0 "Realtek 8139" rev 0x10: irq 5, address > > 00:23:8b:33:d4:7f > > rlphy0 at rl0 phy 0: RTL internal PHY > > smfb0 at pci0 dev 8 function 0 "Silicon Motion LynxEM+" rev 0xb0: > > 1024x600, 16bpp > > wsdisplay0 at smfb0 mux 1: console (std, vt100 emulation) > > ohci0 at pci0 dev 9 function 0 "NEC USB" rev 0x44: irq 7, version 1.0 > > ehci0 at pci0 dev 9 function 1 "NEC USB" rev 0x05: irq 7 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev > > 2.00/1.00 addr 1 > > glxpcib0 at pci0 dev 14 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, > > 32-bit 3579545Hz timer, watchdog, gpio, i2c > > isa0 at glxpcib0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > mcclock0 at isa0 port 0x70/2: mc146818 or compatible > > ykbec0 at isa0 port 0x381/3 > > gpio1 at glxpcib0: 32 pins > > iic at glxpcib0 not configured > > glxclk0 at glxpcib0: clock, prof > > pciide0 at pci0 dev 14 function 2 "AMD CS5536 IDE" rev 0x01: DMA, > > channel 0 wired to compatibility, channel 1 wired to compatibility > > wd0 at pciide0 channel 0 drive 0: <FUJITSU MHZ2160BH G2> > > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > pciide0: channel 1 ignored (disabled) > > auglx0 at pci0 dev 14 function 3 "AMD CS5536 Audio" rev 0x01: isa irq 9, > > CS5536 AC97 > > ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) > > audio0 at auglx0 > > ohci1 at pci0 dev 14 function 4 "AMD CS5536 USB" rev 0x02: isa irq 11, > > version 1.0, legacy support > > ehci1 at pci0 dev 14 function 5 "AMD CS5536 USB" rev 0x02: isa irq 11 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev > > 2.00/1.00 addr 1 > > usb2 at ohci0: USB revision 1.0 > > uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev > > 1.00/1.00 addr 1 > > usb3 at ohci1: USB revision 1.0 > > uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev > > 1.00/1.00 addr 1 > > apm0 at mainbus0 > > umass0 at uhub1 port 1 configuration 1 interface 0 "Generic USB2.0-CRW" > > rev 2.00/58.87 addr 2 > > umass0: using SCSI over Bulk-Only > > scsibus0 at umass0: 2 targets, initiator 0 > > sd0 at scsibus0 targ 1 lun 0: <Generic-, Multi-Card, 1.00> removable > > serial.0bda0158114173400000 > > urtw0 at uhub1 port 4 configuration 1 interface 0 "Realtek > > RTL8187B_WLAN_Adapter" rev 2.00/2.00 addr 3 > > urtw0: RTL8187B rev E, address 00:17:c4:4d:ea:21 > > vscsi0 at root > > scsibus1 at vscsi0: 256 targets > > softraid0 at root > > scsibus2 at softraid0: 256 targets > > pmon bootpath: bootduid=b0c7a9c3d196767f > > root on wd0a (b0c7a9c3d196767f.a) swap on wd0b dump on wd0b > > > > usbdevs: > > Controller /dev/usb0: > > addr 01: 1033:0000 NEC, EHCI root hub > > high speed, self powered, config 1, rev 1.00 > > driver: uhub0 > > Controller /dev/usb1: > > addr 01: 1022:0000 AMD, EHCI root hub > > high speed, self powered, config 1, rev 1.00 > > driver: uhub1 > > addr 02: 0bda:0158 Generic, USB2.0-CRW > > high speed, power 500 mA, config 1, rev 58.87, iSerial > > 20071114173400000 > > driver: umass0 > > addr 03: 0bda:8189 Realtek, RTL8187B_WLAN_Adapter > > high speed, power 500 mA, config 1, rev 2.00, iSerial 00e04c000001 > > driver: urtw0 > > Controller /dev/usb2: > > addr 01: 1033:0000 NEC, OHCI root hub > > full speed, self powered, config 1, rev 1.00 > > driver: uhub2 > > Controller /dev/usb3: > > addr 01: 1022:0000 AMD, OHCI root hub > > full speed, self powered, config 1, rev 1.00 > > driver: uhub3 >
