I've been following -current for a long time now, but in the last month or more there seems to be a problem with the binary packages and the base sets.
This is valid on amd64, for example on i386 everything is fine. The error pops up whenever I want to install or update an X related package: `Can't install openoffice-2.3.1p0: lib not found X11.11.1' If I look in /usr/X11/lib/libX11* the current version is 11.0 while on i386 its 11.1 (thus everything works fine on the former). Now I can compile most of the packages from ports, but when I get to those similar to OpenOffice or KDE its a living nightmare. Any suggestions are welcomed.
OpenBSD 4.2-current (GENERIC) #1334: Fri Jan 11 02:33:56 MST 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 1073016832 (1023MB) avail mem = 1030381568 (982MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0730 (59 entries) bios0: vendor American Megatrends Inc. version "0709" date 08/04/2006 bios0: ASUSTeK Computer INC. P5VDC-MX acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC MCFG OEMB acpi0: wakeup devices UAR1(S0) PS2K(S0) PS2M(S0) EHCI(S0) ILAN(S0) P7P8(S0) P7P9(S0) P2PB(S0) PCI1(S0) PCI2(S0) USB1(S0) USB2(S0) USB3(S0) USB4(S0) SLPB(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P1) acpiprt2 at acpi0: bus 2 (P0P7) acpiprt3 at acpi0: bus 3 (P7P8) acpiprt4 at acpi0: bus 4 (P7P9) acpiprt5 at acpi0: bus 5 (P2PB) acpicpu0 at acpi0 acpibtn0 at acpi0: SLPB acpibtn1 at acpi0: PWRB cpu0 at mainbus0: (uniprocessor) cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz, 2793.54 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR,NXE,LONG cpu0: 1MB 64b/line 8-way L2 cache pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 agp at pchb0 not configured pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pciide0 at pci0 dev 15 function 0 "VIA VT8251 SATA" rev 0x00: DMA pciide0: using irq 10 for native-PCI interrupt wd0 at pciide0 channel 0 drive 1: <WDC WD3200AAKS-00VYA0> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide1 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD/DVDW SDR5472D, TU00> SCSI0 5/cdrom removable cd0(pciide1:0:0): using PIO mode 4, DMA mode 2 pciide1: channel 1 disabled (no drives) uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x90: irq 11 uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x90: irq 5 uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x90: irq 10 uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x90: irq 3 ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 viapm0 at pci0 dev 17 function 0 "VIA VT8251 ISA" rev 0x00 iic0 at viapm0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5 pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00 vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: irq 11, address 00:e0:12:34:56:78 rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1 ppb1 at pci0 dev 19 function 0 "VIA VT8251 PCIE" rev 0x00 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 "VIA VT8251 PCIE" rev 0x00 pci3 at ppb2 bus 3 ppb3 at pci2 dev 0 function 1 "VIA VT8251 PCIE" rev 0x00 pci4 at ppb3 bus 4 ppb4 at pci0 dev 19 function 1 "VIA VT8251 PCI" rev 0x00 pci5 at ppb4 bus 5 cmpci0 at pci5 dev 9 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev 0x10: irq 5 audio0 at cmpci0 opl at cmpci0 not configured mpu at cmpci0 not configured usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 it2 at isa0 port 0xd00/8: IT8712F rev 0x07 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec softraid0 at root root on wd0a swap on wd0b dump on wd0b