On Mon, 19 Jan 2009, Jacob Meuser wrote:
not really surprised the audio's borken.
It is also broken on my hardware. The sound plays alright
in every other app I use, in OA it sounds like it's very low resolution.
Dmesg appended, anything else that might be helpful?
OpenBSD 4.4-current (GENERIC) #1627: Thu Dec 18 21:22:00 MST 2008
dera...@cvs.openbsd.org:/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2200+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.70
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 804810752 (767MB)
avail mem = 769384448 (733MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/05/03, BIOS32 rev. 0 @ 0xfdaf0, SMBIOS
rev. 2.3 @ 0xf0630 (22 entries)
bios0: vendor American Megatrends Inc. version "Version 07.00T" date 04/02/01
bios0: MSI MS-6590
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7fb0/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf600 0xcfe00/0x4400! 0xd4600/0x1800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x80
viaagp0 at pchb0v3,
agp0 at viaagp0: aperture at 0xe0000000, size 0xe800000
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X1650 Pro" rev 0x9e
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
"ATI Radeon X1650 Pro Sec" rev 0x9e at pci1 dev 0 function 1 not configured
cmpci0 at pci0 dev 6 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev
0x10: irq 10
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
bge0 at pci0 dev 11 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3
(0x3003): irq 5, address 00:0c:76:3e:6d:c4
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
"VIA VT6306 FireWire" rev 0x46 at pci0 dev 14 function 0 not configured
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3250824AS>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <ST3250620AS>
wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, DVDR PX-708A, 1.08> ATAPI 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 10
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 10
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x1b 06=f4 08=03 09=03 0b=fc 0c=0a 0d=0a 0e=f4 0f=07 10=0c 11=03
12=04 14=55 15=55 17=ff 18=ff 1c=02 20=fc 22=07 26=30 29=ff words 00=00ff
01=00ff 02=00ff 03=00ff 04=00ff 05=00ff 06=f4ff 07=00ff
iic0: addr 0x2f 04=00 06=0b 07=00 0c=00 0d=07 0e=84 0f=00 10=c0 11=10 12=00
13=60 14=14 15=62 16=01 17=06 words 00=ffff 01=ffff 02=ffff 03=ffff 04=00ff
05=ffff 06=0bff 07=00ff
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2100CL2.5
spdmem2 at iic0 addr 0x52: 256MB DDR SDRAM non-parity PC3200CL3.0
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
audio1 at auvia0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ef65 netmask ef65 ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub3 port 2 configuration 1 interface 0 "BTC USB Multimedia
Keyboard" rev 1.10/1.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "BTC USB Multimedia
Keyboard" rev 1.10/1.30 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=4
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
radeondrm0: Setting GART location based on new memory map
radeondrm0: Can't use AGP base @0xe0000000, won't fit
radeondrm0: Loading R500 Microcode
radeondrm0: writeback test succeeded in 1 usecs
