On 6/7/16 07:37, Kirill Bychkov wrote:
apcupsd was switched from "bsd" driver to "generic-usb" driver after
USB_GET_STRING_DESC removal. In 3.14.14 "generic-usb" is on by default. It
works through libusb from ports.
I've updated my machine to recent amd64 snapshot and updated apcupsd from
packages. Everything works fine.
I've rebuild apcupsd from ports and reinstalled it and it's still works fine:
kirby@humppalaki:ttyp0<apcupsd> % apcaccess
APC : 001,045,1057
DATE : 2016-06-07 14:24:02 +0300
HOSTNAME : humppalaki
VERSION : 3.14.14 (31 May 2016) openbsd
UPSNAME : rs500
CABLE : USB Cable
DRIVER : USB UPS Driver
UPSMODE : Stand Alone
STARTTIME: 2016-06-07 14:23:59 +0300
MODEL : Back-UPS CS 500
STATUS : ONLINE
LINEV : 228.0 Volts
LOADPCT : 18.0 Percent
BCHARGE : 100.0 Percent
TIMELEFT : 28.4 Minutes
MBATTCHG : 10 Percent
MINTIMEL : 5 Minutes
MAXTIME : 0 Seconds
OUTPUTV : 230.0 Volts
SENSE : Medium
DWAKE : 0 Seconds
DSHUTD : 180 Seconds
LOTRANS : 180.0 Volts
HITRANS : 266.0 Volts
RETPCT : 0.0 Percent
ITEMP : 29.2 C
ALARMDEL : 30 Seconds
BATTV : 13.5 Volts
LINEFREQ : 50.0 Hz
LASTXFER : Low line voltage
NUMXFERS : 0
TONBATT : 0 Seconds
CUMONBATT: 0 Seconds
XOFFBATT : N/A
SELFTEST : NO
STESTI : None
STATFLAG : 0x05000008
MANDATE : 2011-11-19
SERIALNO : 4B1147P44167
BATTDATE : 2011-11-19
NOMOUTV : 230 Volts
NOMINV : 0 Volts
NOMBATTV : 12.0 Volts
NOMPOWER : 300 Watts
FIRMWARE : 808.q10 .I USB FW:q
END APC : 2016-06-07 14:24:03 +0300
ugen0 at uhub5 port 1 "American Power Conversion Back-UPS CS 500 FW:808.q10 .I
USB FW:q10" rev 1.10/0.06 addr 2
ok, on the off chance that this was an amd64 vs i386 issue (unlikely
but figured it couldn't hurt to try) I installed the latest amd64 snap
on a different host and updated ports (I had apcupsd installed here in
client mode), attached the UPS and swapped the config file to the
server one, but alas the results are the same. Must be an issue with
my UPS and the new code I guess.
On 6/7/16 08:12, Stuart Henderson wrote:
I am pretty sure you will have the broken behaviour with 3.4.14 on
the old kernel too, which would suggest that there's a problem with
apcupsd's generic usb code either on OpenBSD or in your configuration
(e.g. with your UPS etc).
The easiest case would probably be if you can find someone who has
a working 3.4.14 on -current. If so, I'd install the same, obtain debug
logs and compare with theirs. If there's nothing obvious then maybe
ask upstream for suggestions.
So I started poking around, and this might be relevant
# apctest
2016-06-07 20:18:30 apctest 3.14.14 (31 May 2016) openbsd
Checking configuration ...
sharenet.type = Network & ShareUPS Disabled
cable.type = USB Cable
mode.type = USB UPS Driver
Setting up the port ...
apctest FATAL ERROR in apctest.c at line 321
Unable to open UPS device.
If apcupsd or apctest is already running,
please stop it and run this program again.
apctest error termination completed
(it should be noted nothing was running at this time, I had just
rebooted the host with apcupsd disabled)
Further when setting the debug high and running it on the console I
get this:
# apcupsd -d 666
0.000 apcupsd: apcupsd.c:156 Options parsed.
0.001 apcupsd: apcconfig.c:755 After config scriptdir: "/etc/apcupsd"
0.001 apcupsd: apcconfig.c:756 After config pwrfailpath: "/etc/apcupsd"
0.001 apcupsd: apcconfig.c:757 After config nologinpath: "/etc"
0.001 apcupsd: apcupsd.c:179 Config file /etc/apcupsd/apcupsd.conf
processed.
0.001 apcupsd: newups.c:102 write_lock at drivers.c:109
0.001 apcupsd: drivers.c:111 Looking for driver: usb
0.001 apcupsd: drivers.c:115 Driver dumb is configured.
0.001 apcupsd: drivers.c:115 Driver apcsmart is configured.
0.001 apcupsd: drivers.c:115 Driver net is configured.
0.001 apcupsd: drivers.c:115 Driver usb is configured.
0.002 apcupsd: drivers.c:118 Driver usb found and attached.
0.002 apcupsd: newups.c:108 write_unlock at drivers.c:135
0.002 apcupsd: drivers.c:137 Driver ptr=0xb223d800
0.002 apcupsd: drivers.c:138 Attached to driver: usb
0.012 apcupsd: apcupsd.c:251 NIS thread started.
0.013 apcupsd: apclog.c:62 apcupsd 3.14.14 (31 May 2016) openbsd startup
succeeded
0.014 apcupsd: apclog.c:62 NIS server startup succeeded
0.023 apcupsd: newups.c:102 write_lock at generic-usb.c:457
0.023 apcupsd: HidUps.cpp:50 Initializing libusb
0.033 apcupsd: HidUps.cpp:55 Found 8 USB busses
0.045 apcupsd: HidUps.cpp:57 Found 9 USB devices
0.045 apcupsd: HidUps.cpp:68 000:001 - 8086:0000
0.045 apcupsd: HidUps.cpp:112 Not an APC device.
0.045 apcupsd: HidUps.cpp:68 001:001 - 8086:0000
0.045 apcupsd: HidUps.cpp:112 Not an APC device.
0.045 apcupsd: HidUps.cpp:68 002:001 - 8086:0000
0.045 apcupsd: HidUps.cpp:112 Not an APC device.
0.045 apcupsd: HidUps.cpp:68 002:002 - 051d:0003
0.050 apcupsd: HidUps.cpp:232 Got string of length=16
0.050 apcupsd: HidUps.cpp:151 device='AS1505230549', user='/dev/ugen0'
0.051 apcupsd: HidUps.cpp:68 003:001 - 8086:0000
0.051 apcupsd: HidUps.cpp:112 Not an APC device.
0.051 apcupsd: HidUps.cpp:68 004:001 - 8086:0000
0.051 apcupsd: HidUps.cpp:112 Not an APC device.
0.051 apcupsd: HidUps.cpp:68 005:001 - 8086:0000
0.051 apcupsd: HidUps.cpp:112 Not an APC device.
0.051 apcupsd: HidUps.cpp:68 006:001 - 8086:0000
0.051 apcupsd: HidUps.cpp:112 Not an APC device.
0.051 apcupsd: HidUps.cpp:68 007:001 - 8086:0000
0.051 apcupsd: HidUps.cpp:112 Not an APC device.
0.051 apcupsd: newups.c:108 write_unlock at generic-usb.c:471
5.055 apcupsd: newups.c:102 write_lock at generic-usb.c:457
5.056 apcupsd: HidUps.cpp:50 Initializing libusb
5.062 apcupsd: HidUps.cpp:55 Found 0 USB busses
5.066 apcupsd: HidUps.cpp:57 Found 0 USB devices
5.066 apcupsd: HidUps.cpp:68 000:001 - 8086:0000
5.066 apcupsd: HidUps.cpp:112 Not an APC device.
5.066 apcupsd: HidUps.cpp:68 001:001 - 8086:0000
5.066 apcupsd: HidUps.cpp:112 Not an APC device.
5.066 apcupsd: HidUps.cpp:68 002:001 - 8086:0000
5.066 apcupsd: HidUps.cpp:112 Not an APC device.
5.066 apcupsd: HidUps.cpp:68 002:002 - 051d:0003
5.070 apcupsd: HidUps.cpp:232 Got string of length=16
5.070 apcupsd: HidUps.cpp:151 device='AS1505230549', user='/dev/ugen0'
5.070 apcupsd: HidUps.cpp:68 003:001 - 8086:0000
5.070 apcupsd: HidUps.cpp:112 Not an APC device.
5.070 apcupsd: HidUps.cpp:68 004:001 - 8086:0000
5.070 apcupsd: HidUps.cpp:112 Not an APC device.
5.070 apcupsd: HidUps.cpp:68 005:001 - 8086:0000
5.071 apcupsd: HidUps.cpp:112 Not an APC device.
5.071 apcupsd: HidUps.cpp:68 006:001 - 8086:0000
5.071 apcupsd: HidUps.cpp:112 Not an APC device.
5.071 apcupsd: HidUps.cpp:68 007:001 - 8086:0000
5.071 apcupsd: HidUps.cpp:112 Not an APC device.
5.071 apcupsd: newups.c:108 write_unlock at generic-usb.c:471
(continues ad nauseum)
Both the "Unable to open UPS device" from apctest and the "Not an APC
device" seem like they might be clues, but I'm uncertain if the issue
is upstream or with the recent changes in OpenBSD.
thanks,
.jh
---
# apcaccess
APC : 001,018,0460
DATE : 2016-06-07 18:58:29 -0400
HOSTNAME : thanatos.home.huldtgren.net
VERSION : 3.14.14 (31 May 2016) openbsd
UPSNAME : atlas
CABLE : USB Cable
DRIVER : USB UPS Driver
UPSMODE : Stand Alone
STARTTIME: 2016-06-07 18:58:06 -0400
STATUS : COMMLOST
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME : 0 Seconds
NUMXFERS : 0
TONBATT : 0 Seconds
CUMONBATT: 0 Seconds
XOFFBATT : N/A
STATFLAG : 0x05000100
END APC : 2016-06-07 19:03:19 -0400
ugen0 at uhub2 port 1 "American Power Conversion Smart-UPS 2200 FW:UPS
09.2 / ID=18" rev 2.00/1.06 addr 2
# dmesg
OpenBSD 6.0-beta (GENERIC.MP) #2165: Thu Jun 2 08:37:59 MDT 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2130575360 (2031MB)
avail mem = 2061438976 (1965MB)
User Kernel Config
UKC> disable upd
347 upd* disabled
UKC> disable uhidev
283 uhidev* disabled
UKC> quit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Genuine Intel(R) CPU @ 1.60GHz, 1600.21 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2.0.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU @ 1.60GHz, 1599.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 512KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
mpbios0: bus 0 is type PCI
mpbios0: bus 64 is type ISA
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0612101906001019
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1600, 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E600 Host" rev 0x05
pchb1 at pci0 dev 1 function 0 "Intel E600 Config" rev 0x00
ppb0 at pci0 dev 23 function 0 "Intel E600 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel EG20T PCIE" rev 0x01
pci2 at ppb1 bus 2
"Intel EG20T Packet Hub" rev 0x01 at pci2 dev 0 function 0 not configured
"Intel EG20T Ethernet" rev 0x02 at pci2 dev 0 function 1 not configured
"Intel EG20T GPIO" rev 0x01 at pci2 dev 0 function 2 not configured
ohci0 at pci2 dev 2 function 0 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ohci1 at pci2 dev 2 function 1 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ohci2 at pci2 dev 2 function 2 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ehci0 at pci2 dev 2 function 3 "Intel EG20T USB" rev 0x02: apic 0 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T USB Client" rev 0x02 at pci2 dev 2 function 4 not configured
sdhc0 at pci2 dev 4 function 0 "Intel EG20T SDIO" rev 0x01: apic 0 int 18
sdhc0: SDHC 1.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
sdhc1 at pci2 dev 4 function 1 "Intel EG20T SDIO" rev 0x01: apic 0 int 18
sdhc1: SDHC 1.0, 50 MHz base clock
sdmmc1 at sdhc1: 4-bit, sd high-speed, mmc high-speed
ahci0 at pci2 dev 6 function 0 "Intel EG20T AHCI" rev 0x02: msi, AHCI 1.1
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KingSpec KSM-mSA, 1110> SCSI3
0/direct fixed t10.ATA_KingSpec_KSM-mSATA.5-016SJ_MSA0511122700019_
sd0: 15272MB, 512 bytes/sector, 31277232 sectors
ohci3 at pci2 dev 8 function 0 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ohci4 at pci2 dev 8 function 1 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ohci5 at pci2 dev 8 function 2 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ehci1 at pci2 dev 8 function 3 "Intel EG20T USB" rev 0x02: apic 0 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T DMA" rev 0x00 at pci2 dev 10 function 0 not configured
puc0 at pci2 dev 10 function 1 "Intel EG20T Serial" rev 0x01: ports: 1 com
com4 at puc0 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc1 at pci2 dev 10 function 2 "Intel EG20T Serial" rev 0x00: ports: 1 com
com5 at puc1 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc2 at pci2 dev 10 function 3 "Intel EG20T Serial" rev 0x00: ports: 1 com
com6 at puc2 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc3 at pci2 dev 10 function 4 "Intel EG20T Serial" rev 0x00: ports: 1 com
com7 at puc3 port 0 apic 0 int 19: ti16750, 64 byte fifo
"Intel EG20T DMA" rev 0x00 at pci2 dev 12 function 0 not configured
"Intel EG20T SPI" rev 0x00 at pci2 dev 12 function 1 not configured
"Intel EG20T I2C" rev 0x00 at pci2 dev 12 function 2 not configured
"Intel EG20T CAN" rev 0x00 at pci2 dev 12 function 3 not configured
"Intel EG20T 1588" rev 0x01 at pci2 dev 12 function 4 not configured
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb7 at ohci5: USB revision 1.0
uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
ppb2 at pci0 dev 24 function 0 "Intel E600 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:ad:60
ppb5 at pci4 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:ad:61
ppb6 at pci4 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci7 at ppb6 bus 7
ppb7 at pci0 dev 25 function 0 "Intel E600 PCIE" rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci10 at ppb9 bus 10
em2 at pci10 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:ad:62
ppb10 at pci9 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci11 at ppb10 bus 11
em3 at pci11 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:ad:63
ppb11 at pci9 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci12 at ppb11 bus 12
ppb12 at pci0 dev 26 function 0 "Intel E600 PCIE" rev 0x00
pci13 at ppb12 bus 13
tcpcib0 at pci0 dev 31 function 0 "Intel E600 LPC" rev 0x00: 14318179 Hz
timer, watchdog
isa0 at tcpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
skgpio0 at isa0 port 0x680/32
gpio0 at skgpio0: 16 pins
gpio1 at skgpio0: 2 pins
ugen0 at uhub2 port 1 "American Power Conversion Smart-UPS 2200 FW:UPS
09.2 / ID=18" rev 2.00/1.06 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6fb9381c12ea5fc1.a) swap on sd0b dump on sd0b
