Hello again, There's still a few tickets left for this and it's usually a great weekend in Hebden Bridge.
I hope we'll see a few of you there! https://www.eventbrite.co.uk/e/open-source-hardware-camp-2026-tickets-1992209880381 On Tue, Jun 30, 2026 at 10:48 PM Andy Bennett <[email protected]> wrote: > Hello, > > I'm pleased to announce that we have a total of 11 talks and 3 workshops > confirmed for Open Source Hardware Camp 2026! > > As in previous years, there will be a social event on the Saturday evening. > > Cheers, > > Andy > > // > > > Open Source Hardware Camp 2026 — Sat 29/08 & Sun 30/08, Hebden Bridge > > 29th & 30th August at The Birchcliffe Centre, Birchcliffe Road, Hebden > Bridge, West Yorkshire, HX7 8DG, UK. > > Registration: > > > https://www.eventbrite.co.uk/e/open-source-hardware-camp-2026-tickets-1992209880381 > > Open Source Hardware Camp 2026 will take place in the Pennine town of > Hebden Bridge, which is approximately 1 hour by rail from Leeds and > Manchester. Budget accommodation is available at the Hebden Bridge IOU > Hostel. Details of other local accommodation can be found at > www.hebdenbridge.co.uk and via Airbnb and Booking.com etc. > > There will be a social event on Saturday evening from 7PM. > > Any questions should be directed to the Discussion List. > > Open Source Hardware Camp 2026 is dedicated to the memory of Ken Boak > (1966-2026), a founding member of the group, a prolific contributor and a > good friend to many. > > *** Saturday :: Talks *** > > — Technical Cartoons for Fun (and Profit?) > > What happens if you combine a traditional text book, a bunch of hand drawn > diagrams, and a cartoon robot? > > Electro-Magnetic Compatibility (EMC) has a reputation as one of the more > mysterious electronics subjects. This project is an attempt to make > learning about this subject more intuitive and fun through the power of > cartoons. > > In this talk, James will touch on the subject of Electro-Static Discharges > (ESD), inspirations behind this project, different learning styles, the > self-publishing process, and lessons learned along the way. > > * James Pawson is an electronics engineer, trainer, practitioner of the > dark arts (EMC), and now author. > > — Clean-room reverse engineering the ATTiny 1-series On Chip Debugging > peripheral > > The 1-series is a range of ATtiny microcontrollers released by Microchip > in 2016. They contain an avrxmega3 CPU and a UPDI interface for programming > and debugging. The vendor datasheet for the part documents the UPDI > protocol and provides information to use the Chip Erase, NVM programming > and User Row Programming functionality. The information provided also > allows the interactive reading and writing of the entire CPU Data Space, > which allows host-side interaction with main memory and the on chip > peripherals. As a result, these features are all well supported in open > source tools. > > Finally, the UPDI chapter of the datasheet promises a range of debugging > features including hardware breakpoints, run-time readout of program > counter, stack pointer and CPI status registers for code-profiling and > program flow control (go, stop, reset, step into). However it is silent on > the details required to make use of them. > > In this talk Andy will explain how he reverse engineered the On Chip > Debugger to write a datasheet that has been used to implement a GDB Server > for these devices. > > * Andy Bennett is a highly skilled technologist, business leader, > entrepreneur and problem solver with almost 20 years experience working in > technology. He has worked in a wide variety of industries including > government, finance, higher education and consumer electronics. > > He has a passion for new technologies and has often been at the forefront > of pioneering research, development and new product launches, offering both > strategic oversight and hands-on development. > > — A tale of two tiles: custom chips at home > > Open source silicon provides ordinary people with an opportunity to > manufacture real chips! Hundreds of people have made their own designs, but > what does the journey look like? This talk will cover the who, what, how > and why of the process, with a look at two of Kristaps’ own submissions and > a light dive into tools that make it possible. > > * Kristaps Jurkans is a recent graduate of the University of Lincoln, an > open source hardware and software enthusiast, and a big fan of > disassembling anything just to learn more about it. > > — What does the future hold for an electronics engineer in the age of AI? > > Unless you have been hiding under a rock for the last few years, you will > have noticed that the world is changing at an unprecedented pace. The rise > of Large Language Models (LLMs) is impacting all areas of knowledge work, > doubly so for technology related roles. > > So, what does the future hold for an engineer as we move into this new > era? In this talk we will take a look at some exploratory work Alan has > been performing over the last year or so to see what's possible with LLMs > in the open source hardware space, and what this might mean for the future > of open engineering in general. We will look at some of the tools that are > already available, and some of the exciting possibilities that are on the > horizon. We will also discuss some of the challenges that we will need to > overcome in order to fully realize the quality, educational and > productivity benefits emerging in OSHW. So, if you are an electronics > engineer, a hobbyist or just interested in the future of open source > hardware, this talk is for you! > > * Alan Wood has been working with embedded electronics and FPGAs for many > years. His recent work includes smart grids, 3D printers, robotics, > automation biotec diagnostics, flow computation, measurement and multi > protocol integration. His current research is focused on multilayer > concurrency, mixed language models for complex systems, linux and Rust > based embedded development, realtime testing, capture and analysis. He is a > long term advocate of open source communities, previously a moderator (aka > Folknology) for xCORE, the co-founder of myStorm open hardware FPGA > community, as well as a co-founder of Surrey and Hampshire Makerspace. > > — RISC-V — the road to ubiquity > > Systems based on the open source RISC-V instruction set architecture are > becoming more available and popular in both MCUs and SOCs. The MCU > ecosystem is already well developed, but SOCs have greater dependencies, > and software stacks that have only recently been marked as production > ready. As always happens with new stuff, the hardware people are waiting > for broader software support, and the software people are waiting for a > larger hardware installed base. This talk will examine the forces that are > driving RISC-V forward, and what still needs to happen for RISC-V SOCs to > go mainstream. > > * Chris Swan is a long term member of the OSHUG community, and past > speaker on security, homebrew projects and the Open Compute Project. In his > Engineer role at Atsign he’s been involved in bringing RISC-V support for > the Dart programming language into Docker official images. That’s given him > a front row seat to how hardware and software have been developing over the > past few years. Chris contributes to the broader community as a Google > Developer Expert (GDE), InfoQ editor and co-host for the Tech Debt Burndown > Podcast. > > — Emulating the great machines of the past! > > There are now many excellent software emulations of early systems such as > the PDP-8 and PDP-11 and as such they work well and support the various > operating systems and applications. > > However, the excitement of operating the functioning front panel cannot be > beaten! The range of DEC machines now available as functioning replicas > will be shown and the techniques used to emulate both the software and > hardware will be discussed. > > * Kevin Murrell is a retired software industry entrepreneur. He co-founded > The National Museum of Computing with Tony Sale in 2005. He is the author > of several books on the history of British computing and is an authority on > early home computing. He is a committee member of the Computer Conservation > Society and serves as editor of its journal, Resurrection. > > — This is Not a Chip Butty, but bare silicon needs COB and a PCB, Dave > > Getting custom, open-source silicon back from the foundry is amazing, but > a piece of silicon won't do much without connectivity. This talk offers a > look into the practicalities of getting bare, open-source die connected to > the PCB using Chip-on-Board (COB) wire bonding. > > While COB is a standard industry process, most factories expect automated, > high-volume runs. When you turn up with an artisanal batch of assorted > chips, things can get somewhat experimental. > > We will dive into how multiple Open Source ASIC project die were bonded to > boards, the physical realities of the assembly process, and the fun to be > had along the way. > > * Stuart Childs has spent the last decade working directly with factories > in China, acting as the glue between the clever people and the > manufacturing hubs that can make the things. Before diving into industrial > production, Stuart was a member of the UK Maker Belt and wider UK Maker > scene, increasingly bringing colour, silliness, and fun to the workplace. > As a member of Tiny Tapeout and a long-term Wuthering Bytes attendee, he > combines a passion for open-source hardware with the joy of working with > others on unusual projects. > > — A Multi-Function Instrument for School Physics Experiments > > An overview of school physics apparatus shows that much can be traced back > to the work of the Nuffield Science Teaching Project in the 1960’s. Modern > equivalents, having no other commercial use, are expensive. Off-the-Shelf > commercial instruments are a poor match to educational requirements. > Solutions using general purpose computers raise many IT support problems in > a school environment. > > The multi-function instrument can replace several separate instruments. > The emphasis is on suitability for the school environment: robust, simple > to use, and lacking extra features that serve little pedagogical purpose. > > The objective is to produce an open hardware and software design that can > be easily reproduced by others or form the basis for alternative variations. > > * Alan Bernard. After an apprenticeship with Thorn Electrical Industries > leading to a degree in Electrical and Electronic Engineering at Bradford > University Alan joined a small company where he designed nucleonic > equipment, electronic organs, and apparatus for the Nuffield Physics > Project. After running his own business manufacturing instrumentation for > the wire-drawing industry he joined ITT developing liquid crystal displays. > This led to him designing Public Information Displays for airports, bus and > train stations, and on-board trains. Finally, he worked as a physics > technician at Bradford Grammar School; a position he held for 12 years > before retiring at age 72. > > — Powering Your Home With Your Car > > How to utilise your very own Big Battery for '1/10th' the price of a "Home > Power Wall". (The car comes for free!) > > This adventure takes low cost overnight “off-peak” electricity, and the > occasionally available zero cost excess grid electricity. By utilising the > woefully underutilised battery in my EV, it is possible to then power a > home each day with those low cost electrons to avoid the much more > expensive non-off-peak electrons. Except… There are no UK agreed standards > for doing that yet. Here is a personal all-Open-Source story for > economically connecting a home to a Big Battery on wheels. > > * Martin Lomas has followed the world of computers since the beginnings of > the home computer revolution in the UK. He gained degrees in Computer > Engineering and subsequently Computer Systems Design. At Fujitsu he worked > on, at the time, the world’s largest Application Specific Integrated > Circuit ICs. He moved back to academia to develop cutting edge Scanning > Probe Microscopes for biophysical investigations at the dept of > Pharmaceutical Sciences, The University of Nottingham, gaining his PhD. > > Martin then supported a multinational pharma research company for all > their open source server and computing needs, becoming their IT Director. > Since then, he works for himself. More recently, he is considering his next > career adventure! Especially, he enjoys making new things and making them > work well! He also enjoys hiking, beer, wine, cheese, and the world of > Linux. His interests span across technology and science, and computing and > the ongoing old/new phenomenon now marketed as “AI”. > > — FreeCAD Improvements and Exciting Uses > > FreeCAD, the open source CAD package for mechanical engineering and more, > has had heaps of development in the last few years. Whilst we aren't quite > at the "replace Catia or Solidworks in all sectors" tipping point yet we > have lots more users, a better (but by no means perfect) user experience > and we are beginning to see FreeCAD getting used in all manner of cutting > edge use cases. > > In this talk Jo will quickly run through some of the developments and > explore why it might be worth people who previously didn't enjoy FreeCAD to > take another look. We'll blast by some high end applications of FreeCAD > such as computational fluid dynamics, multi body dynamics and FEA and also > squint at some interesting projects undertaken by organisations you might > not at first glance think would use FreeCAD! I'll throw in some fun aspects > of the community development and talk about FreeCAD's upcoming (but > hopefully delivered by the time this talk takes place) first round of their > global open source hardware design competition! > > * Jo Hinchliffe is a freelance technical writer and community developer > working across a variety of technical sectors with a passion for open > source. > > Jo is the author of FreeCAD for Makers, a well received book from the > Raspberry Pi Press covering beginner and intermediate level usage of > FreeCAD. Also on the Raspberry Pi Press Jo has authored “Design an RP2040 > Board with KiCad” which not only covers the basics of designing a PCB for > fabrication, it goes on to cover automated assembly services, virtual > warehousing and more. > > In article form Jo has written for many platforms, these include multiple > STEM/STEAM articles for the American magazine Kids Code and Computer > Science, these articles range from tutorials on micro controller projects, > to fun maths activities and articles highlighting historic STEM figures. > For the Raspberry Pi Press magazines Jo has written dozens of articles and > features. Often his own projects, these have included a wide variety of > subjects, wooden boat building, an open source carbon fibre filament > winding machine, watch making, cable lacing in space, and much more. A > somewhat complete list of articles can be found here. Toms Hardware, Jo has > written numerous articles for Toms Hardware including a series on basic use > of the Linux terminal. > > Finally when Jo isn’t writing for his paid clients he can currently be > found writing, designing and publishing a free and open source magazine of > his own called SOURCE. > > — Open Wetware: How a bioart project inspired a biopunk future > > This talk will summarise the current trend in biodesign/art to open source > 'recipes', through the lens of a recent art project Phycologica, which > attempted rather foolishly to reimagine a LCD screen made out of algae. > > While I wouldn't recommend anyone else reproducing our design- it would > just lead to more ewaste- I believe there was still great value in the > process of doing this project and in sparking imagination. This was never > intended to be rebuilt in its current form. > > Through preparing this talk I would like to explore, while documenting the > important bits of the project - the recipes, the care guide, the ethics, > what is the value of documenting a project like this? I am also interested > in exploring the documentation itself as an artwork- beyond the original > piece. > > We won't reach a more technologically sustainable (solarpunk) future > without community collaboration and sharing- the exact ethos of open source > hardware. Therefore I propose that the goal of documenting this project > will be to collate a library of alternative, bio appropriate technologies > that are more aligned to a sustainable society that we want to see in the > future. > > Jon Somerscales is an Experience Designer & Interaction Prototyper > researching novel interactions and regenerative design that could highlight > better outcomes for us and the planet through a critical making practice. > His interactive design work spans digital software, services and > installations. > > Studio Blue Green's Phycologica artwork is a collaboration between Jon > Somerscales and Andrew Stone. Studio Blue Green aims to Amplify and > recenter living systems through experience design and creative technology, > creating impactful, planet-first interventions, encouraging environmental > stewardship and ecological consciousness. > > // Compered by: Kevin Murrell // > > Swap Table > > Due to popular demand there will once again be a swap table at Open Source > Hardware Camp, where delegates can bring along surplus components, dev kits > and (smaller!) unfinished projects to give away and swap with others. > > Please note that larger items such as VDUs and printers must not be > brought along and any unwanted items must be removed at the end of the day! > > ITEMS ARE PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, > INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY > AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE > ORGANISERS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, > EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, > PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; > OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, > WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR > OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ITEMS RECEIVED, EVEN IF > ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > > *** Sunday :: Workshops *** > > — Practising the use of LLMs with open source electronics projects > > This workshop will explore some hands-on use of some of the emerging > tools, LLMs and strategies for using them in the engineering space. We will > play with some of what is already available, and explore exciting > possibilities on the horizon. We will also discuss common challenges that > we need to overcome including pitfalls, risks and limitations. So, if you > are a practicing hardware/firmware engineer, or hobbyist, this workshop > gives you an opportunity to tinker with the OSHW future. > > Participants should bring: > > - A laptop. > > Hosted by: Alan Wood. > > — Retro Computing Simulation > > Some of us hanker after an original minicomputer with all the switches and > lights but no longer have access to the hardware. Indeed, few of us have > the space required to recreate installations from those early days when > disk drives were the size of washing machines! > > There are excellent software emulations of many of these early systems, > but the excitement of operating a functioning front panel cannot be beaten! > > We expect to be demonstrating the following running replicas: > > - Wireless World Computer > > - Raspberry Pi based PDP-1, PDP-8, PDP-11 and the PDP-10 > > - FPGA-based LGP-30 > > - FPGA-based PDP-8 > > - IMSAI 8080 > > We will show the systems running and welcome user interaction. So, get out > the old CP/M handbook and the DEC Introduction to Programming and off we go! > > Participants should bring: > > - A laptop. > > Hosted by: Kevin Murrell. > > — The Project Salon > > The project salon is part show and tell and part project clinic, which > will provide an opportunity to discuss projects and share skills and > experience with fellow OSHCamp delegates. For example, this might be > showing off your latest creation, sharing details of a neat hack, or > seeking advice on a particularly tricky problem which has brought your > project to a standstill. > > Rod Moody will be bringing along Raftabar — the autonomous robot which > made its debut at OSHCamp 2024 — and sharing details of numerous upgrades > made over the past few years. > > Short presentations are welcome and if using slides these should be in PDF > or OpenDocument Presentation format. > > Participants should optionally bring: > > - A project. Exercise common sense! E.g. nothing large or dangerous etc. > > - Slides (PDF or OpenDocument Presentation format). > > Hosted by: > > * Andy Bennett. > > * Rod Moody was born in 1940 and at 15 years of age started an electrical > engineering apprenticeship with Dale Electric, a manufacturer of > diesel-engine driven electrical generators ranging from a few kW to a few > MW, for both base load and standby applications. Through day release and > night class he gained an HNC in electrical engineering, and at the age of > 19 was appointed to the post of Test Department Manager. He went on to > become Electrical Engineering Manager responsible for running the design > office and designing control systems using relay logic, and following which > Engineering Director. > > In 1992, at 52 years of age Rod joined Deep Sea Electronics as their > Engineering Manager. DSE were quite small at that time and using > through-hole technology, but with improved product design and the > introduction of SMT production they grew very rapidly over the eight years > before Rod retired in 2000 at 60 years of age. DSE is now the leading > supplier of microprocessor based controllers to generating set > manufacturing companies worldwide. > > In retirement Rod spends most of his spare time with projects involving > mechanics, electronics, and software using the Raspberry Pi and Arduino > microcontrollers. He continues to be a keen gardener as he has been from an > early age, has a keen interest in all aspects of science and engineering, > and is currently leader of the York U3A Science & Engineering World group. > > > NOTE: > > > - > > There are separate tickets for Saturday and Sunday. > - > > A light lunch will be provided each day. > - > > Please aim to arrive between 09:00 and 09:15 on the Saturday as the > event will start at 09:20 prompt. > > > > -- You received this message because you are subscribed to the Google Groups "Potteries Hackspace" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion, visit https://groups.google.com/d/msgid/potteries-hackspace/CADpjm_SiwnPwQDOQx3%3DhVTbOfu-2RDLGDbzXPXjbDD4np0taoA%40mail.gmail.com.
