Hello,

Just a final call in case there is anyone who plans to attend and has not
registered yet. Registration is set to close at 09:00 tomorrow morning so
that we can confirm numbers with the caterers.

  https://oshug.org/event/oshcamp2026




On Tue, Jun 30, 2026 at 10:48 PM Andy Bennett <[email protected]> wrote:

> Hello,
>
> I'm pleased to announce that we have a total of 11 talks and 3 workshops
> confirmed for Open Source Hardware Camp 2026!
>
> As in previous years, there will be a social event on the Saturday evening.
>
> Cheers,
>
> Andy
>
>  //
>
>
> Open Source Hardware Camp 2026 — Sat 29/08 & Sun 30/08, Hebden Bridge
>
> 29th & 30th August at The Birchcliffe Centre, Birchcliffe Road, Hebden
> Bridge, West Yorkshire, HX7 8DG, UK.
>
> Registration:
>
>
> https://www.eventbrite.co.uk/e/open-source-hardware-camp-2026-tickets-1992209880381
>
> Open Source Hardware Camp 2026 will take place in the Pennine town of
> Hebden Bridge, which is approximately 1 hour by rail from Leeds and
> Manchester. Budget accommodation is available at the Hebden Bridge IOU
> Hostel. Details of other local accommodation can be found at
> www.hebdenbridge.co.uk and via Airbnb and Booking.com etc.
>
> There will be a social event on Saturday evening from 7PM.
>
> Any questions should be directed to the Discussion List.
>
>   Open Source Hardware Camp 2026 is dedicated to the memory of Ken Boak
> (1966-2026), a founding member of the group, a prolific contributor and a
> good friend to many.
>
> *** Saturday :: Talks ***
>
> — Technical Cartoons for Fun (and Profit?)
>
> What happens if you combine a traditional text book, a bunch of hand drawn
> diagrams, and a cartoon robot?
>
> Electro-Magnetic Compatibility (EMC) has a reputation as one of the more
> mysterious electronics subjects. This project is an attempt to make
> learning about this subject more intuitive and fun through the power of
> cartoons.
>
> In this talk, James will touch on the subject of Electro-Static Discharges
> (ESD), inspirations behind this project, different learning styles, the
> self-publishing process, and lessons learned along the way.
>
> * James Pawson is an electronics engineer, trainer, practitioner of the
> dark arts (EMC), and now author.
>
> — Clean-room reverse engineering the ATTiny 1-series On Chip Debugging
> peripheral
>
> The 1-series is a range of ATtiny microcontrollers released by Microchip
> in 2016. They contain an avrxmega3 CPU and a UPDI interface for programming
> and debugging. The vendor datasheet for the part documents the UPDI
> protocol and provides information to use the Chip Erase, NVM programming
> and User Row Programming functionality. The information provided also
> allows the interactive reading and writing of the entire CPU Data Space,
> which allows host-side interaction with main memory and the on chip
> peripherals. As a result, these features are all well supported in open
> source tools.
>
> Finally, the UPDI chapter of the datasheet promises a range of debugging
> features including hardware breakpoints, run-time readout of program
> counter, stack pointer and CPI status registers for code-profiling and
> program flow control (go, stop, reset, step into). However it is silent on
> the details required to make use of them.
>
> In this talk Andy will explain how he reverse engineered the On Chip
> Debugger to write a datasheet that has been used to implement a GDB Server
> for these devices.
>
> * Andy Bennett is a highly skilled technologist, business leader,
> entrepreneur and problem solver with almost 20 years experience working in
> technology. He has worked in a wide variety of industries including
> government, finance, higher education and consumer electronics.
>
> He has a passion for new technologies and has often been at the forefront
> of pioneering research, development and new product launches, offering both
> strategic oversight and hands-on development.
>
> — A tale of two tiles: custom chips at home
>
> Open source silicon provides ordinary people with an opportunity to
> manufacture real chips! Hundreds of people have made their own designs, but
> what does the journey look like? This talk will cover the who, what, how
> and why of the process, with a look at two of Kristaps’ own submissions and
> a light dive into tools that make it possible.
>
> * Kristaps Jurkans is a recent graduate of the University of Lincoln, an
> open source hardware and software enthusiast, and a big fan of
> disassembling anything just to learn more about it.
>
> — What does the future hold for an electronics engineer in the age of AI?
>
> Unless you have been hiding under a rock for the last few years, you will
> have noticed that the world is changing at an unprecedented pace. The rise
> of Large Language Models (LLMs) is impacting all areas of knowledge work,
> doubly so for technology related roles.
>
> So, what does the future hold for an engineer as we move into this new
> era? In this talk we will take a look at some exploratory work Alan has
> been performing over the last year or so to see what's possible with LLMs
> in the open source hardware space, and what this might mean for the future
> of open engineering in general. We will look at some of the tools that are
> already available, and some of the exciting possibilities that are on the
> horizon. We will also discuss some of the challenges that we will need to
> overcome in order to fully realize the quality, educational and
> productivity benefits emerging in OSHW. So, if you are an electronics
> engineer, a hobbyist or just interested in the future of open source
> hardware, this talk is for you!
>
> * Alan Wood has been working with embedded electronics and FPGAs for many
> years. His recent work includes smart grids, 3D printers, robotics,
> automation biotec diagnostics, flow computation, measurement and multi
> protocol integration. His current research is focused on multilayer
> concurrency, mixed language models for complex systems, linux and Rust
> based embedded development, realtime testing, capture and analysis. He is a
> long term advocate of open source communities, previously a moderator (aka
> Folknology) for xCORE, the co-founder of myStorm open hardware FPGA
> community, as well as a co-founder of Surrey and Hampshire Makerspace.
>
> — RISC-V — the road to ubiquity
>
> Systems based on the open source RISC-V instruction set architecture are
> becoming more available and popular in both MCUs and SOCs. The MCU
> ecosystem is already well developed, but SOCs have greater dependencies,
> and software stacks that have only recently been marked as production
> ready. As always happens with new stuff, the hardware people are waiting
> for broader software support, and the software people are waiting for a
> larger hardware installed base. This talk will examine the forces that are
> driving RISC-V forward, and what still needs to happen for RISC-V SOCs to
> go mainstream.
>
> * Chris Swan is a long term member of the OSHUG community, and past
> speaker on security, homebrew projects and the Open Compute Project. In his
> Engineer role at Atsign he’s been involved in bringing RISC-V support for
> the Dart programming language into Docker official images. That’s given him
> a front row seat to how hardware and software have been developing over the
> past few years. Chris contributes to the broader community as a Google
> Developer Expert (GDE), InfoQ editor and co-host for the Tech Debt Burndown
> Podcast.
>
> — Emulating the great machines of the past!
>
> There are now many excellent software emulations of early systems such as
> the PDP-8 and PDP-11 and as such they work well and support the various
> operating systems and applications.
>
> However, the excitement of operating the functioning front panel cannot be
> beaten! The range of DEC machines now available as functioning replicas
> will be shown and the techniques used to emulate both the software and
> hardware will be discussed.
>
> * Kevin Murrell is a retired software industry entrepreneur. He co-founded
> The National Museum of Computing with Tony Sale in 2005. He is the author
> of several books on the history of British computing and is an authority on
> early home computing. He is a committee member of the Computer Conservation
> Society and serves as editor of its journal, Resurrection.
>
> — This is Not a Chip Butty, but bare silicon needs COB and a PCB, Dave
>
> Getting custom, open-source silicon back from the foundry is amazing, but
> a piece of silicon won't do much without connectivity. This talk offers a
> look into the practicalities of getting bare, open-source die connected to
> the PCB using Chip-on-Board (COB) wire bonding.
>
> While COB is a standard industry process, most factories expect automated,
> high-volume runs. When you turn up with an artisanal batch of assorted
> chips, things can get somewhat experimental.
>
> We will dive into how multiple Open Source ASIC project die were bonded to
> boards, the physical realities of the assembly process, and the fun to be
> had along the way.
>
> * Stuart Childs has spent the last decade working directly with factories
> in China, acting as the glue between the clever people and the
> manufacturing hubs that can make the things. Before diving into industrial
> production, Stuart was a member of the UK Maker Belt and wider UK Maker
> scene, increasingly bringing colour, silliness, and fun to the workplace.
> As a member of Tiny Tapeout and a long-term Wuthering Bytes attendee, he
> combines a passion for open-source hardware with the joy of working with
> others on unusual projects.
>
> — A Multi-Function Instrument for School Physics Experiments
>
> An overview of school physics apparatus shows that much can be traced back
> to the work of the Nuffield Science Teaching Project in the 1960’s. Modern
> equivalents, having no other commercial use, are expensive. Off-the-Shelf
> commercial instruments are a poor match to educational requirements.
> Solutions using general purpose computers raise many IT support problems in
> a school environment.
>
> The multi-function instrument can replace several separate instruments.
> The emphasis is on suitability for the school environment: robust, simple
> to use, and lacking extra features that serve little pedagogical purpose.
>
> The objective is to produce an open hardware and software design that can
> be easily reproduced by others or form the basis for alternative variations.
>
> * Alan Bernard. After an apprenticeship with Thorn Electrical Industries
> leading to a degree in Electrical and Electronic Engineering at Bradford
> University Alan joined a small company where he designed nucleonic
> equipment, electronic organs, and apparatus for the Nuffield Physics
> Project. After running his own business manufacturing instrumentation for
> the wire-drawing industry he joined ITT developing liquid crystal displays.
> This led to him designing Public Information Displays for airports, bus and
> train stations, and on-board trains. Finally, he worked as a physics
> technician at Bradford Grammar School; a position he held for 12 years
> before retiring at age 72.
>
> — Powering Your Home With Your Car
>
> How to utilise your very own Big Battery for '1/10th' the price of a "Home
> Power Wall". (The car comes for free!)
>
> This adventure takes low cost overnight “off-peak” electricity, and the
> occasionally available zero cost excess grid electricity. By utilising the
> woefully underutilised battery in my EV, it is possible to then power a
> home each day with those low cost electrons to avoid the much more
> expensive non-off-peak electrons. Except… There are no UK agreed standards
> for doing that yet. Here is a personal all-Open-Source story for
> economically connecting a home to a Big Battery on wheels.
>
> * Martin Lomas has followed the world of computers since the beginnings of
> the home computer revolution in the UK. He gained degrees in Computer
> Engineering and subsequently Computer Systems Design. At Fujitsu he worked
> on, at the time, the world’s largest Application Specific Integrated
> Circuit ICs. He moved back to academia to develop cutting edge Scanning
> Probe Microscopes for biophysical investigations at the dept of
> Pharmaceutical Sciences, The University of Nottingham, gaining his PhD.
>
> Martin then supported a multinational pharma research company for all
> their open source server and computing needs, becoming their IT Director.
> Since then, he works for himself. More recently, he is considering his next
> career adventure! Especially, he enjoys making new things and making them
> work well! He also enjoys hiking, beer, wine, cheese, and the world of
> Linux. His interests span across technology and science, and computing and
> the ongoing old/new phenomenon now marketed as “AI”.
>
> — FreeCAD Improvements and Exciting Uses
>
> FreeCAD, the open source CAD package for mechanical engineering and more,
> has had heaps of development in the last few years. Whilst we aren't quite
> at the "replace Catia or Solidworks in all sectors" tipping point yet we
> have lots more users, a better (but by no means perfect) user experience
> and we are beginning to see FreeCAD getting used in all manner of cutting
> edge use cases.
>
> In this talk Jo will quickly run through some of the developments and
> explore why it might be worth people who previously didn't enjoy FreeCAD to
> take another look. We'll blast by some high end applications of FreeCAD
> such as computational fluid dynamics, multi body dynamics and FEA and also
> squint at some interesting projects undertaken by organisations you might
> not at first glance think would use FreeCAD! I'll throw in some fun aspects
> of the community development and talk about FreeCAD's upcoming (but
> hopefully delivered by the time this talk takes place) first round of their
> global open source hardware design competition!
>
> * Jo Hinchliffe is a freelance technical writer and community developer
> working across a variety of technical sectors with a passion for open
> source.
>
> Jo is the author of FreeCAD for Makers, a well received book from the
> Raspberry Pi Press covering beginner and intermediate level usage of
> FreeCAD. Also on the Raspberry Pi Press Jo has authored “Design an RP2040
> Board with KiCad” which not only covers the basics of designing a PCB for
> fabrication, it goes on to cover automated assembly services, virtual
> warehousing and more.
>
> In article form Jo has written for many platforms, these include multiple
> STEM/STEAM articles for the American magazine Kids Code and Computer
> Science, these articles range from tutorials on micro controller projects,
> to fun maths activities and articles highlighting historic STEM figures.
> For the Raspberry Pi Press magazines Jo has written dozens of articles and
> features. Often his own projects, these have included a wide variety of
> subjects, wooden boat building, an open source carbon fibre filament
> winding machine, watch making, cable lacing in space, and much more. A
> somewhat complete list of articles can be found here. Toms Hardware, Jo has
> written numerous articles for Toms Hardware including a series on basic use
> of the Linux terminal.
>
> Finally when Jo isn’t writing for his paid clients he can currently be
> found writing, designing and publishing a free and open source magazine of
> his own called SOURCE.
>
> — Open Wetware: How a bioart project inspired a biopunk future
>
> This talk will summarise the current trend in biodesign/art to open source
> 'recipes', through the lens of a recent art project Phycologica, which
> attempted rather foolishly to reimagine a LCD screen made out of algae.
>
> While I wouldn't recommend anyone else reproducing our design- it would
> just lead to more ewaste- I believe there was still great value in the
> process of doing this project and in sparking imagination. This was never
> intended to be rebuilt in its current form.
>
> Through preparing this talk I would like to explore, while documenting the
> important bits of the project - the recipes, the care guide, the ethics,
> what is the value of documenting a project like this? I am also interested
> in exploring the documentation itself as an artwork- beyond the original
> piece.
>
> We won't reach a more technologically sustainable (solarpunk) future
> without community collaboration and sharing- the exact ethos of open source
> hardware. Therefore I propose that the goal of documenting this project
> will be to collate a library of alternative, bio appropriate technologies
> that are more aligned to a sustainable society that we want to see in the
> future.
>
> Jon Somerscales is an Experience Designer & Interaction Prototyper
> researching novel interactions and regenerative design that could highlight
> better outcomes for us and the planet through a critical making practice.
> His interactive design work spans digital software, services and
> installations.
>
> Studio Blue Green's Phycologica artwork is a collaboration between Jon
> Somerscales and Andrew Stone. Studio Blue Green aims to Amplify and
> recenter living systems through experience design and creative technology,
> creating impactful, planet-first interventions, encouraging environmental
> stewardship and ecological consciousness.
>
> // Compered by: Kevin Murrell //
>
> Swap Table
>
> Due to popular demand there will once again be a swap table at Open Source
> Hardware Camp, where delegates can bring along surplus components, dev kits
> and (smaller!) unfinished projects to give away and swap with others.
>
> Please note that larger items such as VDUs and printers must not be
> brought along and any unwanted items must be removed at the end of the day!
>
> ITEMS ARE PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
> INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
> AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> ORGANISERS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
> EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
> PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
> OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ITEMS RECEIVED, EVEN IF
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>
> *** Sunday :: Workshops ***
>
> — Practising the use of LLMs with open source electronics projects
>
> This workshop will explore some hands-on use of some of the emerging
> tools, LLMs and strategies for using them in the engineering space. We will
> play with some of what is already available, and explore exciting
> possibilities on the horizon. We will also discuss common challenges that
> we need to overcome including pitfalls, risks and limitations. So, if you
> are a practicing hardware/firmware engineer, or hobbyist, this workshop
> gives you an opportunity to tinker with the OSHW future.
>
> Participants should bring:
>
>     - A laptop.
>
> Hosted by: Alan Wood.
>
> — Retro Computing Simulation
>
> Some of us hanker after an original minicomputer with all the switches and
> lights but no longer have access to the hardware. Indeed, few of us have
> the space required to recreate installations from those early days when
> disk drives were the size of washing machines!
>
> There are excellent software emulations of many of these early systems,
> but the excitement of operating a functioning front panel cannot be beaten!
>
> We expect to be demonstrating the following running replicas:
>
>    - Wireless World Computer
>
>    - Raspberry Pi based PDP-1, PDP-8, PDP-11 and the PDP-10
>
>    - FPGA-based LGP-30
>
>    - FPGA-based PDP-8
>
>    - IMSAI 8080
>
> We will show the systems running and welcome user interaction. So, get out
> the old CP/M handbook and the DEC Introduction to Programming and off we go!
>
> Participants should bring:
>
>    - A laptop.
>
> Hosted by: Kevin Murrell.
>
> — The Project Salon
>
> The project salon is part show and tell and part project clinic, which
> will provide an opportunity to discuss projects and share skills and
> experience with fellow OSHCamp delegates. For example, this might be
> showing off your latest creation, sharing details of a neat hack, or
> seeking advice on a particularly tricky problem which has brought your
> project to a standstill.
>
> Rod Moody will be bringing along Raftabar — the autonomous robot which
> made its debut at OSHCamp 2024 — and sharing details of numerous upgrades
> made over the past few years.
>
> Short presentations are welcome and if using slides these should be in PDF
> or OpenDocument Presentation format.
>
> Participants should optionally bring:
>
>    - A project. Exercise common sense! E.g. nothing large or dangerous etc.
>
>    - Slides (PDF or OpenDocument Presentation format).
>
> Hosted by:
>
> * Andy Bennett.
>
> * Rod Moody was born in 1940 and at 15 years of age started an electrical
> engineering apprenticeship with Dale Electric, a manufacturer of
> diesel-engine driven electrical generators ranging from a few kW to a few
> MW, for both base load and standby applications. Through day release and
> night class he gained an HNC in electrical engineering, and at the age of
> 19 was appointed to the post of Test Department Manager. He went on to
> become Electrical Engineering Manager responsible for running the design
> office and designing control systems using relay logic, and following which
> Engineering Director.
>
> In 1992, at 52 years of age Rod joined Deep Sea Electronics as their
> Engineering Manager. DSE were quite small at that time and using
> through-hole technology, but with improved product design and the
> introduction of SMT production they grew very rapidly over the eight years
> before Rod retired in 2000 at 60 years of age. DSE is now the leading
> supplier of microprocessor based controllers to generating set
> manufacturing companies worldwide.
>
> In retirement Rod spends most of his spare time with projects involving
> mechanics, electronics, and software using the Raspberry Pi and Arduino
> microcontrollers. He continues to be a keen gardener as he has been from an
> early age, has a keen interest in all aspects of science and engineering,
> and is currently leader of the York U3A Science & Engineering World group.
>
>
> NOTE:
>
>
>    -
>
>    There are separate tickets for Saturday and Sunday.
>    -
>
>    A light lunch will be provided each day.
>    -
>
>    Please aim to arrive between 09:00 and 09:15 on the Saturday as the
>    event will start at 09:20 prompt.
>
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Potteries Hackspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion, visit 
https://groups.google.com/d/msgid/potteries-hackspace/CADpjm_Ri3tS2B4Yfwc1cfACwg0sHDwUmbdtJcMeFGbXJtKAKiQ%40mail.gmail.com.

Reply via email to