There's one problem with the macro approach, that's when the vnc remote connection comes into play. If the remote pc isn't running powerpro then all is fine, all characters are sent to the remote pc, the macro is locally recognized and locally+remotely translated. But if the remote pc is running powerpro, which is my case, then the macro is recognized both locally and remotely, and expanded twice, first remotely, then locally and it is sent to the remote system. So you end up with two (same) characters at the remote system instead of one.
------------------------ Yahoo! Groups Sponsor --------------------~--> Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar. Now with Pop-Up Blocker. Get it for free! http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/JV_rlB/TM --------------------------------------------------------------------~-> Attention: PowerPro's Web site has moved: http://www.ppro.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/power-pro/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
