All, I am trying to understand the complexities of swapping displays between various versions of the PowerBook Duo and could use some help.
I have a Duo 230 (passive matrix greyscale) with a bad on-board SCSI (I somehow trashed it during a hard drive swap.). I also have a good Duo 280 motherboard. It is my understanding that the 280 motherboard will not support the passive matrix display from the 230, correct? Now, I know where I can get a cheap "parts" Duo 250 (active matrix screen). If I were to buy it, could I: 1) Can I use the active matrix screen from the 250 with the 280 motherboard? If so, do I need any extra/different parts/cables? 2) Can I use the motherboard from the 250 with the 230 passive matrix screen? (My understanding is that this is possible, but I'm mostly interested in it from the standpoint of building a 230 out of the leftovers should option 1 be doable.) Thanks... <<<john>>> -- PowerBooks is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> PowerBooks list info: <http://lowendmac.com/lists/powerbooks.shtml> --> AOL users, remove "mailto:" Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/powerbooks%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com