Hello folks. Got a situation I'm hoping you can advise on. The stats: PTP250 with 256 mg. RAM, one 4-gb hard drive and another 9 gb hard drive. Printer: HP DeskJet 870Cse. Scanner: Microtek ScanMaker E6.
Recently we upgraded from OS 8.0 to OS 9.1, which has been a tremendous improvement. We did this at the same time that we doubled the RAM to 256, so we have lots fewer freezes now. Trouble is, we can't get the printer and the scanner to work with 9.1. Consequently we put 8.0 on the 9-gb drive and have to boot that up whenever we need to print. (9.1 is on the 4-gb drive, which we have traditionally used exclusively for operating system and software.) Any advice on how to get the printer and scanner to work with 9.1? We'd very much like to dump 8.0 altogether. Thanks, brainiacs. Monica -- Power Computing is sponsored by <http://lowendmac.com/> and... 123Inkjets.com <http://lowendmac.com/ad/123inkjets.html> Support Low End Mac <http://lowendmac.com/lists/support.html> Power Computing list info: <http://lowendmac.com/power/list.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> List archive: <http://www.mail-archive.com/powercomputing%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
