Fermi 2 has two older "smart" turnstyles used during outages to control access
to the drywell. Unfortunately, we are still using the PDA version (2.0.3) of
the smart turnstyle software. We are having issues getting the software to
read the RWP and task number from the DMC 2000 dosimeter. Last outage we were
still using the LDM-101 to log into the RRA with version 1.01 of Sentinel.
This outage we are using the LDM-220 with version 1.08 of Sentinel to log into
the RRA. The turnstyles have always used the LDM-210 reader. We think not
being able to read the RWP and task number is due to the change in the type of
reader we are using with Sentinel. Anybody have any feedback on what the
settings for the RWP and Task number would be in set up for version 2.0.3 when
using the LDM-220 to log into the RRA? Additionally, DMC Viewer doesn't pick
up the RWP and task number correctly anymore either since we are using the
LDM-220 now instead of the LDM-101. What would the settings be in DMC Viewer
for the RWP and task number? We even did the un-guy like thing and read the
manual but weren't able to work through it. Thanks in advance to any
assistance anyone can be.
Brad Krupp
Fermi 2
734.586.4084
