Brad, Interesting issue and if you don’t get an adequate response here in this forum you may want to talk to PTI and or MG directly.
Changing access control readers from the LDM-101 to the LDM-220 should not have made a difference, I guessing that the issue is in Sentinel. Also, the LDM-210 and LDM-220 are essentially the same readers, the 220 has a USB connector and the 210 has a 9-pin connector. We use the DMC Viewer software with the LDM-220 and it has no problem reading the dosimeters’ after they are set up in Sentinel Seth. From: [email protected] [mailto:[email protected]] On Behalf Of Bradley A Krupp Sent: Monday, October 04, 2010 8:02 AM To: [email protected] Cc: Brian G Gonia; Benjy P Bertossi; Carl Beaujon Subject: Powernet: Smart turnstyles Fermi 2 has two older "smart" turnstyles used during outages to control access to the drywell. Unfortunately, we are still using the PDA version (2.0.3) of the smart turnstyle software. We are having issues getting the software to read the RWP and task number from the DMC 2000 dosimeter. Last outage we were still using the LDM-101 to log into the RRA with version 1.01 of Sentinel. This outage we are using the LDM-220 with version 1.08 of Sentinel to log into the RRA. The turnstyles have always used the LDM-210 reader. We think not being able to read the RWP and task number is due to the change in the type of reader we are using with Sentinel. Anybody have any feedback on what the settings for the RWP and Task number would be in set up for version 2.0.3 when using the LDM-220 to log into the RRA? Additionally, DMC Viewer doesn't pick up the RWP and task number correctly anymore either since we are using the LDM-220 now instead of the LDM-101. What would the settings be in DMC Viewer for the RWP and task number? We even did the un-guy like thing and read the manual but weren't able to work through it. Thanks in advance to any assistance anyone can be. Brad Krupp Fermi 2 734.586.4084 Email Firewall made the following annotations --------------------------------------------------------------------- --- NOTICE --- This message is for the designated recipient only and may contain confidential, privileged or proprietary information. If you have received it in error, please notify the sender immediately and delete the original and any copy or printout. Unintended recipients are prohibited from making any other use of this e-mail. Although we have taken reasonable precautions to ensure no viruses are present in this e-mail, we accept no liability for any loss or damage arising from the use of this e-mail or attachments, or for any delay or errors or omissions in the contents which result from e-mail transmission. ---------------------------------------------------------------------
