Limerick uses 100 cm2 active area sources, certified to within 20% of the monitor alarm set point. Currently using Tc-99 on model VZ-626-001, manufactured by Eckert & Ziegler.
John Duskin Limerick -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rouse, Raymond Lawrence Sent: Friday, June 03, 2011 9:44 AM To: [email protected] Subject: Powernet: What sources do you use for personnel monitor What type of sources does your station use for daily response check for PCM-1B, PCM-2 and ARGOS Raymond Rouse Health Physicist Watts Bar Nuclear Plant PO Box 2000 Spring City, Tn 37381 (423)-365-1881 [email protected] <mailto:[email protected]> ----------------------------------------- ************************************************** This e-mail and any of its attachments may contain Exelon Corporation proprietary information, which is privileged, confidential, or subject to copyright belonging to the Exelon Corporation family of Companies. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. Thank You. ************************************************** ----------------------------------- Powernet - a service of the Health Physics Society Power Reactor Section Powernet archives at http://www.mail-archive.com/[email protected]/ Reply to: [email protected] If Questions, contact Mike Russell, CHP at [email protected]
