Palo Verde requests information on the following: 1) What equipment do you use for Alpha smear and air sample counting?
2) What equipment do you use for Beta smear and air sample counting? 3) What statistical tests (LAC) do you perform on your scaler counting equipment, e.g., Chi-Squared Testing, Confidence Interval Testing, etc.? 4) Where / when do you perform long term performance checks, e.g., are after instrument calibration, in the Cal Lab facility or at the use location? Is this a RP Tech function or is a separate qualification required? 5) For daily performance checks, what source confidence levels do you use, e.g., within 2 sigma standard deviation? Kenneth Walter RP Technical Advisor, Radiological Engineering P.O. Box 52034, Tonopah, AZ 85354, M.S. 7663 Tel 623 393 5482 Pager 877 503 8549 Fax 623 393 6640 [email protected]<mailto:[email protected]> --- NOTICE --- This message is for the designated recipient only and may contain confidential, privileged or proprietary information. If you have received it in error, please notify the sender immediately and delete the original and any copy or printout. Unintended recipients are prohibited from making any other use of this e-mail. Although we have taken reasonable precautions to ensure no viruses are present in this e-mail, we accept no liability for any loss or damage arising from the use of this e-mail or attachments, or for any delay or errors or omissions in the contents which result from e-mail transmission.
<<inline: Picture (Device Independent Bitmap) 1.jpg>>
