No.  Palo Verde does what Diablo Canyon does, small check sources available to 
test field kit survey instrument response prior to use and measured a single 
point.


From: [email protected] [mailto:[email protected]] On Behalf Of 
Liesl K Germann
Sent: Sunday, February 26, 2012 1:34 PM
To: [email protected]
Subject: Powernet: EP Instrument Source Checks

Do you apply the below ANSI N323A-1997 Section 4.8 statement regarding source 
response checks to your Emergency Planning instruments?


4.8 Source response check

To ensure proper operation of the instrument between calibrations, each 
instrument (with the exception of neutron instruments and high-dose equivalent 
rate photon instruments) shall be checked with a source during operation at 
least daily or prior to each intermittent use, whichever is less frequent.  If 
at any time the instrument response to the source differs from the reference 
reading by more than 20% (for any photon instrument the reading should be at 
least ten times background), the instrument shall be returned to the 
calibration facility for calibration or for maintenance, repair, and 
recalibration, as required. [ ...] Reference readings should be obtained for 
one point on each scale or decade used.


Thank you!

Liesl Germann
Health Physicist
Millstone Power Station
860-447-1791 Ext. 6511
[email protected]<mailto:[email protected]>



CONFIDENTIALITY NOTICE: This electronic message contains information which may 
be legally confidential and/or privileged and does not in any case represent a 
firm ENERGY COMMODITY bid or offer relating thereto which binds the sender 
without an additional express written confirmation to that effect. The 
information is intended solely for the individual or entity named above and 
access by anyone else is unauthorized. If you are not the intended recipient, 
any disclosure, copying, distribution, or use of the contents of this 
information is prohibited and may be unlawful. If you have received this 
electronic transmission in error, please reply immediately to the sender that 
you have received the message in error, and delete it. Thank you.
--- NOTICE ---

This message is for the designated recipient only and may contain confidential, 
privileged or proprietary information.  If you have received it in error, 
please notify the sender immediately and delete the original and any copy or 
printout.  Unintended recipients are prohibited from making any other use of 
this e-mail.  Although we have taken reasonable precautions to ensure no 
viruses are present in this e-mail, we accept no liability for any loss or 
damage arising from the use of this e-mail or attachments, or for any delay or 
errors or omissions in the contents which result from e-mail transmission.

Reply via email to