Palo Verde currently uses the LANCS Air Fed (Bubble) Hood for making internal Steam Generator entries. Until recently, we used the plant's service air system to supply breathing air; however, due to a plant modification this was no longer available for use and we have subsequently replaced the plant system with temporary breathing air compressors that are external to the Containment Building.
Palo Verde would like to know the following: If you use bubble hoods, what brand / manufacture do you use? What is your source for grade D breathing air, e.g., plant system, compressor, etc.? Thanks in advance, Seth --- NOTICE --- This message is for the designated recipient only and may contain confidential, privileged or proprietary information. If you have received it in error, please notify the sender immediately and delete the original and any copy or printout. Unintended recipients are prohibited from making any other use of this e-mail. Although we have taken reasonable precautions to ensure no viruses are present in this e-mail, we accept no liability for any loss or damage arising from the use of this e-mail or attachments, or for any delay or errors or omissions in the contents which result from e-mail transmission.
