Exelon LaSalle County Station Responds
Cavity and Dryer separator pit walls are stainless steel. Inner and outer bellows area are carbon steel, both these areas are covered by aluminum grating We do not use RC-10, we use Syntech "Touch It Up" as our decon solution 1) Will be using WEPA on walls for upcoming 2014 outage on cavity walls. Use strippable coating for Dryer Separator pit walls and floor, Bartlett TLC. 2) Work is done by contract laborers that work for RP year round 3) Same answer as above, contract laborers. 4) Cavity decon is scheduled for 8 hours after drain down is complete 5) Typically 10-50K, last outage we were not that successful Steve Lorenz LaSalle Station Decon/ARW Supervisor '(815) 415-2390 Pager:(815) 983-0340 Home:(815) 436-5053 Cell:(815) 592-6276 Fax:(815) 415-4018 [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Kennedy, John T. Sent: Monday, August 19, 2013 9:47 AM To: [email protected] Subject: Powernet: BWR Cavity Decontamination Hope Creek Generating Station (BWR) would like to know what your site uses for cavity walls and dryer separator pit walls, floor, lower internals or upper internals walls and floor decontamination. Does your site use strippable coating? Is the cavity stainless or carbon steel? Does your site use RC-10 Epicor 1. What method do you use (hydrolasing, foam, strippable paint etc). - 2. Do you do this in house or contract out - 3. Do you have your own decontamination force. - 4. Scheduled duration. 5. Post decontamination smearable contamination levels. Thank You [email protected] John Kennedy PSEG Radiation Protection Hope Creek Generating Station PO Box 236, MC H05 Hancock's Bridge, NJ 08038 856-339-1320 FAX 856-339-3336 ________________________________ The information contained in this e-mail, including any attachment(s), is intended solely for use by the named addressee(s). If you are not the intended recipient, or a person designated as responsible for delivering such messages to the intended recipient, you are not authorized to disclose, copy, distribute or retain this message, in whole or in part, without written authorization from PSEG. This e-mail may contain proprietary, confidential or privileged information. If you have received this message in error, please notify the sender immediately. This notice is included in all e-mail messages leaving PSEG. Thank you for your cooperation. This e-mail and any attachments are confidential, may contain legal, professional or other privileged information, and are intended solely for the addressee. If you are not the intended recipient, do not use the information in this e-mail in any way, delete this e-mail and notify the sender. -EXCIP
<<image003.jpg>>
