If I may add on to these questions I would like to know the following: Does your site use a computerized database for tracking HEPA's and Vacuums?
If yes would you be willing to share that information? From: [email protected] [mailto:[email protected]] On Behalf Of Lorenz, Steven M:(GenCo-Nuc) Sent: Wednesday, March 19, 2014 8:55 AM To: [email protected] Subject: RE: Powernet: Question on HEPA Vacuum Programs Exelon LaSalle Station responses 1) No locking device on electric cord. There is however a tamper proof seal placed on unit between the top and bottom half of units 2) Not locking device for electric cord but the tamper proof seal placement is in procedure 3) ALL HEPA units and Vacuums are DOP tested annually or after HEPA filter has been replaced 4) HEPA units are DOP tested annually 5) Air techniques 6) Yes Steve Lorenz [cid:[email protected]] LaSalle Station Decon/ARW Supervisor '(815) 415-2390 Pager:(815) 983-0340 Home:(815) 436-5053 Cell:(815) 592-6276 Fax:(815) 415-4018 [email protected]<mailto:[email protected]> From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of [email protected]<mailto:[email protected]> Sent: Monday, March 17, 2014 11:53 AM To: [email protected]<mailto:[email protected]> Subject: Powernet: Question on HEPA Vacuum Programs Questions on HEPA Vacuum Programs (Sent by Sun Lee for Dom Magda): Perry Nuclear Power Plant would like to know the following: 1. Do you use locking devices or seals to prevent inadvertent access to electrical cords on vacuums? 2. Does the procedure cover the use of locking device? 3. Industry guidance recommends annual filter integrity testing or testing following opening the vacuum is this performed? Is this conducted on a yearly basis or each time a vacuum is changed out? 4. Is it sufficient enough to consider the purchase of DOP tested hepa filters with certificate of conformance as testing to meet INPO guidelines? If so how was that handled by a white paper? 5. Vendor or manufacture to purchase testing unit to meet standards? 6. Can I receive a copy of the procedure that governs vacuum control program and testing of units? Any Specific replies or further questions can be directed to: Dom Magda, RP Decon Superivsor Perry Nuclear Plant [email protected]<mailto:[email protected]> 440-280-7368 Thank you. ----------------------------------------- The information contained in this message is intended only for the personal and confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately, and delete the original message. This e-mail and any attachments are confidential, may contain legal, professional or other privileged information, and are intended solely for the addressee. If you are not the intended recipient, do not use the information in this e-mail in any way, delete this e-mail and notify the sender. -EXCIP ---------------------------------------------------------------------- This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, or acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
<<inline: image001.jpg>>
