Simon 6/6/03 10:55 pm Simon Barber <sibarber-at-globalnet.co.uk> wrote
>Hello > > >Im am spending a lot of dosh on inkjet cartridges for prints for my >Epson. I was wondering if any members had tried any of the cheaper >generic brands and had an opinion on their quality. Also I understand >that Epson cartridges can be refilled. Does this work? I think Epson >cartridges may be chipped to prevent this. Some makers have worked around the chips. However, your sensible money saving route is Lyson inska nd a coontinuous ink supply. I'm told Epson inks are 1000 pounds a litre, the buld Fotonics are betweeen 125ml for 15 and 1 litre for about 65. see http://www.colourmanagement.net/lyson.html Using generic or refilled cartridges will remove any semblance of print output continuity you have at present. How much paper do you want to waste? IF you are using a profile you'll be giving it very little chance with refilled carts. Bit like using different mixed brands of film at the same exposure ;-}, it might work, but it might not. >Any thoughts gratefully received. hope it points you in the right direction Regards, NeilB. Apple Solutions Expert colourmanagement.net :: Consulting in Imaging & Colour Management custom scanner and printer profiles, training on Imacon Scanning supply Gretag + eyeOne, ColorSoloutions basICColor : Display etc. XRite www.colourmanagement.net/ :: www.apple.com/uk/creative/neilbarstow/ =============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
