Please clarify what module in Chrono you are interested in using. Defining collision geometry is different for different modules. --Radu
From: [email protected] <[email protected]> On Behalf Of Lucas Sent: Friday, June 28, 2024 4:22 PM To: ProjectChrono <[email protected]> Subject: [chrono] Hollow cylinder and other similar geometries Hi there, I have a question: I need to create a cylindrical container (i.e. a hollow cylinder) but I've noticed that this type of geometry is not present in chrono. I thought of performing a sort of boolean subtraction between an inner and outer cylinder by setting false to the EnableCollision command, however this causes me problems since I would have to use the cylinder as a container and the EnableCollision of the outer cylinder remains set to true. Is there a simple method without resorting to CAD imports to create geometries of this type or similar? Thanks. -- You received this message because you are subscribed to the Google Groups "ProjectChrono" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/projectchrono/57372832-50ee-47ee-8c90-4e9bd32a6d82n%40googlegroups.com<https://urldefense.com/v3/__https:/groups.google.com/d/msgid/projectchrono/57372832-50ee-47ee-8c90-4e9bd32a6d82n*40googlegroups.com?utm_medium=email&utm_source=footer__;JQ!!Mak6IKo!KVm6znbXDxktHyTJNsWSuqJGADExNmMyN4KOKCkgOiiYax_n-0cId8yFsmkAOQor5aKjzVFAHSn4evMxHbMeLqt7$>. -- You received this message because you are subscribed to the Google Groups "ProjectChrono" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/projectchrono/CH3PPF46CDC2185B5A258B99931F6CDA05EA7D02%40CH3PPF46CDC2185.namprd06.prod.outlook.com.
