Sorry I have to relearn Protel 99 every time I use it. I'm trying to get a power printout and I can't get the pads of components to show up on the bottom layer. The free pads like vias and those pads that I put in as pads show up. The pads in the components I'm using are multilayer. I've set all the things in Multilayer>Layer Properties>Component primitves to "Full" and I've done the rebuild. What else is there left to try?
Paul Gaastra email: [EMAIL PROTECTED] BioEngineering Technologies, HortResearch Private Bag 3123 phone +64 7 8584745 Hamilton, NEW ZEALAND fax +64 7 8584705 ______________________________________________________ The contents of this e-mail are privileged and/or confidential to the named recipient and are not to be used by any other person and/or organisation. If you have received this e-mail in error, please notify the sender and delete all material pertaining to this e-mail. ______________________________________________________ ************************************************************************ * Tracking #: DA1D486F35F27B41846A18217E00FBAED5E2D403 * ************************************************************************ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
