Paul, Have you included the Multilayer in the list of layers in the plot?
Right click on the printout name in the PCBPrint Explorer Panel and select Properties. Add the Multilayer to the list. Another possibility is the colour assigned to the Multilayer layer is the same as the background. This can be checked uner Tools | Preferences | Colours & Grey Scales Apart from these two, I'm out of suggestions at the moment. Best Regards, Linden Doyle Product Development Engineer Zener Electric Pty Ltd. Ph: +61 2 9795 3600 Fax: +61 2 9795 3611 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > -----Original Message----- > From: Paul Gaastra [mailto:[EMAIL PROTECTED]] > Sent: Thursday, 18 July 2002 1:41 PM > To: Protel EDA Forum > Subject: [PEDA] PPC missing Component Pads on bottom layer > > > Sorry I have to relearn Protel 99 every time I use it. > > I'm trying to get a power printout and I can't get the pads of > components to show up on the bottom layer. The free pads like vias and > those pads that I put in as pads show up. The pads in the components > I'm using are multilayer. I've set all the things in Multilayer>Layer > Properties>Component primitves to "Full" and I've done the rebuild. > What else is there left to try? > > Paul Gaastra email: [EMAIL PROTECTED] > BioEngineering Technologies, HortResearch > Private Bag 3123 phone +64 7 8584745 > Hamilton, NEW ZEALAND fax +64 7 8584705 > > > ______________________________________________________ > The contents of this e-mail are privileged and/or confidential to the > named recipient and are not to be used by any other person and/or > organisation. If you have received this e-mail in error, please notify > the sender and delete all material pertaining to this e-mail. > ______________________________________________________ > > ************************************************************************ > * Tracking #: DA1D486F35F27B41846A18217E00FBAED5E2D403 > * > ************************************************************************ > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
