Brian thanks for your reply, I'm looking at the KRK VXT8 or 6 at the moment, the 8's are in the same price range as the Adam A7x, I looked and listened to it but they're too bright and crispy to my liking. I've also looked at Genelec but haven't tryed them yet but will look out for the mid range problems you've mentioned. As you might know yamaha no longer makes the legendary NS10's in sted the HS range is suppose to be a replacement a NS10 with bass they clame, well from guys who's fortunate enough to have NS10's I've heard that you must really know them to get something sounding good it's like a car without ABS brakes or traction control you have to know your stuff to drive it but yet so many of the very good and legendary mixing engineers sware by them. A lecturer I had last year told me he had a pair of HS80's and they have the same problem as the NS10's, he had them for 2 years and still couldn't quite figure out how to work them. I also looked at the HS80's but for this reason I'm kind off scared of them, I know you must learn to use your monitors and that's probably why so many sware by the NS10 but I found that I addadapted to a lot of other monitors a lot quicker so a bit scared of the yamaha's. Oh and I currently have M-audio studiofile bx5a's but it's time to move up in the world.
Brian Casey wrote: > Hi Nickus, > > In my opinion, there isn't too much point getting caught up with things like > the development of a 20 cycle wave etc, and I think from reading your post > you are thinking along the same lines. > > Simply buy the best speakers you can at the moment with the budget you've > got. At the price range your talking about, all speakers are designed for > nearfield use, which would mean listening from a distance of 6 feet or less, > which in my mind eliminates the question of the need to develop those low > frequency sound waves anyway. Acoustics is a tricky business, but if you > have the best speakers you can afford you'll really improve because you'll > know much better the exact nature of the sound your working with. > > having your speakers on stands or something that will isolate them from your > desk will help a lot too I would imagine. > > I purchased Adam ax7 moniters, and for the price I got them at I'm > absolutely delighted. But there are many speakers around that price point > that are doing good things for various people. My main criteria was buying > from a manufacturer that makes very well respected speakers at higher price > points, and buying a speaker that was regarded as exposing things in the mix > rather than making everything sound great. The mid range on the speakers I > chose for example are said to be a little similar to the NS10, helping for > vocal mixing and critical work in the mid range. Now I wouldn't read too > much into such claims by manufacturers or other users, but its worth keeping > in mind. I've enjoyed working with genelec speakers for example, but they do > seem to suffer from having a scooped mid range, which contrastly often > makes things sound a little more pleasing than they might be on other > systems. I didn't find it a huge problem for acoustic and electronic music, > but when I was working with more rock/pop oriented stuff on Genelecs I found > it difficult to know the impact of what I was mixing sometimes. > > So all I'm saying really is buy the best speakers that you can find given > your budget and the research you do, and you'll never look back. > > Since I bought mine I've been working in the same relatively untreated room, > and with the only new element being the new speakers over the last year my > mixes have improved ten times over with out exaggeration. I'm moving to a > great new room soon specifically designed for mixing, and while I'm > expecting some improvement again in my mix work, I'll probably never again > experience such an improvement as I did after making the jump t better > speakers. > > Best of luck with your research, hope tha thelped a little, > Brian. > > ---------------- > > From: "Nickus de Vos" <[email protected]> > Sent: Thursday, December 29, 2011 12:03 PM > To: "Pro Tools Accessibility" <[email protected]> > Subject: OT room size and monitor size > > > Hi all I know this has nothing to do with PT but it has to do with > > sound. I'm just looking for some opinions before investing round $1000 > > in studio monitors. > > The other day I read a article where the guy said if your monitors is > > too large for your room you'll never get a propper sound because the > > sound waves don't have space to fully develope. Now by theory I know 1 > > cycle of a 20 Hz wave is 17.2 meters long and a 100 Hz wave is 3.44 > > meters long so that guys theory doesn't make scence because it means > > everybody should have a mixing room longer than 3.44 meters to > > reproduce anything below 100 Hz. Now I have been around and very few > > studios I visited had control rooms longer than 4 or 5 meters not even > > mentioning the 17.2 meters for 20 Hz, not even mastering engineers who > > usually has longer rooms go that long. I also know that I will > > probably have my monitors for way longer than the time I use this > > current room for mixing so it's a long term investment and I mustn't > > spesifically buy monitors to fit my room. I currently have a 4 x 3.5 > > meter room which is acoustically treeted, at the moment it sounds ok > > but I still want to improve it over time. I basically have to decide > > between 6 or 8 inch monitors with the 8's obviously havving a better > > bass responce and a bigger price tag. I'm just curious to what you are > > using and how it works for you, theory always helps but the opinions > > of other people also counts for a lot in my experience. > > > > Nickus > >
