if you look in the degidesign or avid folder in your applications folder, you should finda documentations folder. In there you should find every manual for every pro tools related product. On Mar 27, 2012, at 11:37 PM, Nick Gawronski <n...@nickgawronski.com> wrote:
>> >> On Mar 27, 2012, at 10:06 PM, Nick Gawronski wrote: >> >>> Hi, Is it possible to use both microphone and line in inputs one and two at >>> the same time and have them going to different tracks? How can I make sure >>> my digi 003 is setup so the issue with the audio clock setting does not >>> come up? If I am going to use all analog inputs including microphones how >>> many microphones and line in inputs can I have routing to different tracks >>> active at once? Nick Gawronski >>> >>> On 3/27/2012 8:09 PM, Slau Halatyn wrote: >>>> >>>> On Mar 27, 2012, at 7:39 PM, Nick Gawronski wrote: >>>> >>>>> Hi, I just turned off and back on the 003 and pushed no other buttons. >>>>> Does the digi 003 save settings in it's internal memory if it has any? In >>>>> the pro tools hardware program it does say 44.1KHZ but it does not say >>>>> how to change the setting? >>>> >>>> The 003 does not determine sample rate. sample rate is set when you create >>>> a session and, therefore, cannot be changed on the fly. You'd have to use >>>> the "Save Copy In?" command to save the session in a different sample rate. >>>> >>>>> Is analog outputs 1 and 2 the headphone plugs or does it automatically >>>>> go to them if I did not change any other settings and what inputs are the >>>>> microphone and normal line in ones so I know? Nick Gawronski >>>>> Anything routed to your main stereo pair will also show up on your >>>>> headphone jacks which are located at the front right bottom of the unit >>>>> closest to you. The Mic inputs are obviously the 4 XLR jacks and the line >>>>> inputs are beneath them and are quarter-inch jacks. You set the input >>>>> selection on the 003 by pushing the Mic/Line button below the gain knobs. >>>> >>>> HTH, >>>> >>>> >>>> Slau >>>> >>
