Hi Brian, The "bombfactory BF-2A Plug-In " did display what your looking for but the ones you mentioned did not! All my waves stuff does! Just set a hotspot and monitor it while your playing back and VoiceOver will speak out the readings as you go. I mainly use this for mastering with the waves l2 for precision observations of this. Using VoiceOver move to the lower right hand side of the plug and then its located 3 or 4 parameter displays to the left for quickly getting there to mark your hotspot! I was surprised that the "maxim Plug-In" did not display this BTW! If it sounds smashed it is! :) Raise your threshold until it is not smashed! ;) GUFFAWING :) ;)
YMMV CHUCK REICHEL 954-742-0019 www.SoundPictureRecording.com In GOD I Trust On Apr 26, 2012, at 12:31 PM, Brian Howerton wrote: > Hello all, > For those of you who do mixing professionally, in sonar using the CakeTalking > scripts, we could read and see how much gain reduction was taking place when > a track was being compressed. I'm assuming that we cannot read those meters > or does protools even have any gain reduction meter or makeup gain for that > matter… When I was in the compressor 3 plugin the other day when Kevin > Reeves was training me, I didn't see a makeup gain control and I didn't see > anything in there about gain reduction meters. So for those of you who mix > with protools professionally, how can you tell how much compression is taking > place on a track? Is there a workaround for this so we can tell exactly how > much compression is taking place? THanks, > Brian
