Slau, could it be a resolution issue? I can't remember if the 003 only
supports up to 96KHZ play back.
----- Original Message -----
From: "Slau Halatyn" <slauhala...@gmail.com>
To: <ptaccess@googlegroups.com>
Sent: Sunday, February 02, 2014 1:58 PM
Subject: Re: question about playing back a pro tools session I got from
school recorded in pro tools 8 HD
I'd suggest the following:
Go into your I/O Setup, press Command-2 for output tab, Command-a to select
all outputs and press the Delete Path button. Say OK to the warning and then
click the Default button which will create default output paths for your
interface. bTW, before doing the above, you might want to make sure your
playback engine is set to 003 in your Playback preferences.
After hitting OK on the I/O dialog, go to one of your tracks and interact
with it. Move down to the output assignment. Bring mouse cursor focus to it.
With a physical mouse button or trackpad button, use the Option modifier
with a click to set all track outputs to the same selection and choose your
main stereo outputs.
Slau
On Feb 2, 2014, at 5:39 PM, Nick Gawronski <n...@nickgawronski.com> wrote:
Hi, I was given a pro tools session by one of my instructors to mess
around with but they recorded it on pro tools 8 HD and have now upgraded
to 10. When I try to open up the session all of the outputs are set to
different outputs on my digi 003 and no matter what I do no audio plays.
I can see the wav files and select each one and play them back normally
but would like to be able to get all of the tracks like they should be
played back. I did go into each track and set them to outputs 1 and 2 but
not totally sure if something else is going on that prevents the session
from getting played back and I am not getting any errors from pro tools 11
on my system that says this playback engine can't play the files as they
are at 44100 sample rate. What can I try to get these files working
properly on my system? Nick Gawronski
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.