Hi Chris. The client is happy with the track and actually asked that
the snare be fattened up. (grin)
It's interesting how opinions differ on this stuff and I'm just out
to learn more as I go.
At 12:08 PM 12/9/2014, you wrote:
Personally, I didn't find it all that bad. OK, yeah, the drums
might have been just a tad bit too loud in the mix, but I said a
slight! bit. I'm not kidding when I say, it really wasn't! that bad
at all. I think if you was to turn down the drums by maybe 1 to 1
and a half DB, I'd say 2 at most, pushing it to the extreme, you'd
be ok. Yeah, you probably could have rolled off some of the lows of
the drums, especially the snare, but you'd want to be really careful
doing so. You almost have it sitting where it needs to be, so if
you go too far with it, it's going to sound terrible, as there would
be no low ends at all. I agree with Papa. It's very good. There
is! an issue with the drums, I'll admit, but like him, I can't quite
put my finger on it. Try turning them down about maybe a DB and a
half, then send it back to us to hear again. That should! do the
trick. Pre-Processing, before you route the drums through any
effects, or compressers, etc. just the raw dry mix of the over all
drums, what is it peeking at with your meters at its highest point?
Chris.
--- Christopher Gilland
Phone: 704-594-2225
E-mail: clgillan...@gmail.com
Web site:
http://www.clgproductions.com
Twitter: @gilland_chris
Facebook:
http://www.facebook.com/chris28210
Skype: chris28210
IMessage/Facetime:
cgwaxhawlo...@clgproductions.com
Zello: clgproductions
and: christablet123
Please kindly, add both, if you don't mind.
----- Original Message ----- From: "Chris Smart" <csma...@cogeco.ca>
To: <ptaccess@googlegroups.com>
Sent: Tuesday, December 09, 2014 11:39 AM
Subject: RE: Opinions Wanted On a Recent Mix
interesting. thanks, i'll look into that.
hmm yep a little pumping in there.
At 11:07 AM 12/9/2014, you wrote:
Hello Chris, nice overall mix. The only thing that stands out to
me is the bass and the drum. I am not sure if the drum has to many
low frequencies that need to be cut and then boost some of the
higher frequencies around maybe 150HZ. Or, it could be a
compression thing I think I am hearing, either way, it sounds like
there is a little pumping between the kick and the bass. Keep in
mind, I could be wrong in my diagnosis, but I like the mix with
the exception of that little aspect that seems to stand out to me.
-----Original Message-----
From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
On Behalf Of Chris Smart
Sent: Tuesday, December 09, 2014 6:42 AM
To: midi...@midimag.org
Cc: ddot...@freelists.org; ptaccess@googlegroups.com
Subject: Opinions Wanted On a Recent Mix
Hi folks.
I mixed and mastered an easy listening track for Brian Howerton
recently, and since I haven't mixed something lighter like this
before, I thought I would ask for opinions on it. Here's a 48-second sample:
https://www.sendspace.com/pro/dl/7bhny7
So, what do you like and more importantly, what do you not like?
What would you have done differently?
For instance, I was too attached to the drum sound, but after
Brian asked for them to be turned down, I now appreciate the
improvement. After all, without a vocalist, the piano really is
the main event here.
By the way, if this is your thing, contact Brian at
bshowert...@gmail.com Thanks Brian, for the work, and for patience
as I got my ears together, after not mixing for ages.
Chris
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
