I set mine up for rig output. If you’d rather use the XLR outputs, you should be fine. Some rigs are stereo, as are those outputs - so if you want proper mono sound, you’ll have to take both of those outputs into separate channels and mix down to mono.
> On 25 Feb 2015, at 22:28, Rui Vilarinho <ruia...@hotmail.com> wrote: > > Ok friend, but did you set up that front pannel mono output to give the rigg > sound or you mean the dry sound only ? > Sorry if I explained wrong but I want to record a mono output but with the > rigg sound and for that i know that it's the single line out jack conection > on the back pannel. > What I want to make sure is if that's ok to use any of the stereo XLR > outputs aswel ? since balanced XLR cables seems to be a better choice. > Thanks, > Rui Vilarinho > >> ----- Original Message ----- >> From: ashley cox <mailto:ashleycox...@googlemail.com> >> To: ProTools Accessibility <mailto:ptaccess@googlegroups.com> >> Sent: Wednesday, February 25, 2015 10:08 PM >> Subject: Re: Avid 11rack mono output doubt >> >> I’d use the mono output. It’s the middle jack in the row of 3 at the front. >> >> >>> On 25 Feb 2015, at 22:00, Rui Vilarinho <ruia...@hotmail.com >>> <mailto:ruia...@hotmail.com>> wrote: >>> >>> Hi 11rack users, >>> Am I correct using only one of the two XLR back pannel stereo output but >>> as a mono output ? >>> Seems to be the same, right or left, although experience say to me that >>> usually use the left one . >>> I dont really enjoy much stereo guitar recording therefore I am testing it >>> out connecting my Avid 11rack to my MAudio Profire 2626 audio interface . >>> Anyway 11rack guitar delays arent so ping pong crazy stuff,yet since I >>> dont want to use stereo mono analog it's fine, straight to one of the >>> MAudio Profire 2626 XLR Octane preamps , boosting it a bit if needed and >>> this way converting the sound once again to digital and bang bang a better >>> guitar recording sound ! >>> Or, the only mono output with the rigg standard sound xpected sound it's >>> the Jack line out ? >>> Just a thought ! what's your thoughts ? >>> Thanks in advance, >>> Rui Vilarinho >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com >>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>> For more options, visit https://groups.google.com/d/optout >>> <https://groups.google.com/d/optout>. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com >> <mailto:ptaccess+unsubscr...@googlegroups.com>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com > <mailto:ptaccess+unsubscr...@googlegroups.com>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.